Marshall NEW DSL100H 100-Watt 2-Channel Tube Head

Price List Rp.9.975.000

Marshall NEW DSL100H 100-Watt 2-Channel Tube Head

Marshall's Legendary DSL is Back in Action
The Marshall DSL100H 100-watt guitar amp head gives you the definitive essence of British tubularity. Reigning supreme for a decade, the DSL series enjoyed worldwide acclaim. So with a nod to to pent-up player demand, Marshall presents their new, all-tube DSL Series. Amazingly affordable, the DSL100H Dual Super Lead head fortifies your tone arsenal with fearsome power and the tastiest tonal qualities and features of both modern and vintage Marshals - in one highly tweakable package. From glassy cleans to bone-rattling crunch to blistering high gain, your wish is the Marshall DSL100H's command.
Marshall DSL100H 100-watt All-tube Guitar Amp Head at a Glance:

• The DSL Series - a revered tonal heritage 
• A 100-watt tone beast
• Two channels, and all the trimmings

The DSL Series - a revered tonal heritage
The Marshall DSL100H hails from a revered lineage. Marshall introduced the JCM2000 Dual Super Lead (DSL) series amps in 1997. Right from the get-go, these all-tube monsters enjoyed enthusiastic approval by guitarists and the press alike, forming the backlines of top acts in all musical genres and bludgeoning audiences worldwide for a decade before being replaced by Marshall's JVM series (a musical powerhouse in its own right). Considered the "go-to rock amp" by many tone-savvy guitarists, there is considerable pent-up demand for Dual Super Leads. Marshall hears you, and is proud to introduce the new-and-improved DSL series.

A 100-watt tone beast
Marshall's DSL100H is an all-tube, twin-channel beast capable of conjuring any classic Marshall sound - past or present. Four ECC83s in the preamp section (in concert with the amp's gain/master volume arrangement) give you stunning tone-shaping mojo, and with four EL34s in the engine room, you've got the volume to rule any stage in the world. Sporting, in fact, precisely the same tube compliment and feature set as the original DSL100, Marshall has gone on to fit this monster with critical upgrades that give you even more control over your sound. You now get a Resonance control (as opposed to the original's fixed Deep switch), letting you dial in your preferred amount of low-end girth. You also get studio-grade digital Reverb (instead of spring), a rear-panel Pentode/Triode switch that drops the amp's power to a club-and-studio-friendly 50 watts, and a bypassable rear-panel Series FX loop. Marshall's even included a 2-way footswitch for channel switching and Reverb on/off.

Two channels, and all the trimmings
The Marshall DSL100H sports two footswitchable channels: Classic Gain and Ultra Gain. Each channel boasts two modes: Clean/Crunch and Lead 1/Lead 2, respectively. With the DSL100H, you can go from glassy Plexi-esque cleans, to JCM800-style snarl, hot-mod 2203, face-melting high gain - and everything in-between. To shape all this delectable Marshall tone, you get flexible shared 5-way EQ (Treble, Middle, Bass, Resonance, and Presence) juiced with the thoughtful inclusion of a Tone Shift button - ideal for scooped modern metal mojo. The DSL100H is ready to rock. Are you?
Marshall DSL100H 100-watt All-tube Guitar Amp Head Features:

• This beast is capable of conjuring any classic Marshall sound - past or present
• Two channels: Classic Gain and Ultra Gain
• Each channel boasts two modes: Clean/Crunch and Lead 1/Lead 2, respectively
• Highly effective Resonance control replaces the original's fixed Deep switch
• Tone Shift button gives you incredible tonal flexibility
• Studio-grade digital Reverb
• Rear-panel Pentode/Triode switch drops the amp's output to a club-and-studio-friendly 50 watts
• Bypassable rear-panel Series FX loop
• Included 2-way footswitch for channel switching and Reverb on/off

Specification:

Type

Tube

Number of Channels

2

Power

100/50 watts

Effects

No effects

Reverb

Yes (digital)

EQ

5-way (Treble, Middle, Bass, Resonance, and Presence)

Amp Modeling

No modeling

Number of Models

0

Number of Tubes

8

Preamp Tubes

4 (ECC83)

Power Tubes

4 (EL34)

Inputs

1 x TS

Footswitch I/O

Yes (footswitch included)

Effects Loop

Yes

Manufacturer Part Number

DSL100H

Marshall MG100HCFX Carbon Fiber Guitar Amplifier Head

Price List Rp.8.760.000
Marshall MG100HCFX Carbon Fiber Guitar Amplifier Head
The Marshall MG100HCFX provides pure analog Marshall tone. With a totally redesigned internal design and approach, the MG Series delivers essential digital features, but with vast superior and programmable analogue tone at its heart. 

Innovation, Functionality, Tone - just a few words that help sum up the range of solid-state MG amplifiers from Marshall. Combining years of experience in analogue amplification with cutting-edge digital technology has resulted in the creation of an all-encompassing amplifier series, ideal for the beginner and gigging pro alike.

Specially voiced digital effects, intuitive footswitching technology and four adjustable and storable channels are just a few of the features found in the MG range. From a punchy 10-watt combo through to an effects laden, soul pounding 100-watt head, this series has it all.
Features

• Modern brushed silver panel and carbon fiber look vinyl
• Programmable FX include studio and spring reverb; octave plus reverse delay
• Three simultaneous digital FX at once
• Four programmable analog channels
• Clean, Crunch, OD1, OD2
• Stompware pedal friendly
• 3 band EQ
• Programmable speaker damping
• Headphone jack
• 100 watts
• Two way channel switching footswitch included

MG412C Carbon Fiber Guitar Speaker Cabinet, 4x12
The Marshall MG412C carbon fiber guitar speaker cabinet is the perfect complement to the MG carbon fiber series of amplifiers.
Features

• Modern brushed silver panel and carbon fiber look vinyl
• 4 x 12-inch cabinet with carbon fiber tolex
• 8 ohm
• Angled Cabinet

Specification:

Output (RMS):

100W

Channels (storable):

Clean, Crunch, OD1, OD2

Digital Effects:

Chorus, Phaser, Flanger, Vibe, Octave

Digital Delay:

Hi-Fi, Tape, Multi, Reverse

Digital Reverb:

Spring, Studio

Power Amp Damping Switch:

Yes

Mp3/ Line In jack:

Yes

Emulated headphone Output:

Yes

External FX Loop:

Yes

2-Way Chgannel Switching Footswitch:

Supplied

MG Footcontroller Compatible:

Yes

Dimensions:

26.5" x 19.4" x 10.9" (674 x 494 x 278 mm)

Weight:

49.3 lb. (22.4 kg)

Marshall JVM410H Joe Satriani Edition

Price List Rp.29.800.000
Marshall JVM410H 1960AJSB Joe Satriani 

Marshall JVM410H +Cabinet 1960AJSB Joe Satriani Edition

Built to please Joe Satriani himself, the Marshall JVM410H Joe Satriani Edition amp head lets you plug into the exact same tone machine as Satch does. When Joe returned to playing Marshall amps in 2009, he quickly decided the JVM410H was the amplifier for him - allowing a few tweaks of course. Joe requested custom-voiced channels, noise gates instead of reverb, feedback that was more controllable, and a more dynamic sound - and Marshall came through in spades. Built to please one of the most iconic guitarists in music history, you'll love playing through the Marshall JVM410H Joe Satriani Edition amp head.
Marshall JVM410H Joe Satriani Edition Amplifier Head at a Glance:

• Four channel versatility, voiced by Joe Satriani
• Built-in noise gates
• A more dynamic JVM410

Four channel versatility, voiced by Joe Satriani
When it comes to tone, Satch knows what he likes. For the JVM410H Joe Satriani Edition, Joe took his favorite tonal blend and put them all in one amplifier. The clean channel is actually the same design featured in Marshall's LM6100. The orange crunch channel is the same design as the JCM800 (2203), and the red crunch channel is similar to the AFD100 amp head in AFD mode. And the overdrive channels have been tuned to sound less compressed and more dynamic and open. Once the tonal palette was perfect, Joe put his stamp of approval on the JVM410H Joe Satriani Edition.

Built-in noise gates
Each of the four channels on the JVM410H Joe Satriani Edition amp head feature a noise gate (from the 2203KK Kerry King signature amp head), instead of the reverb normally found on the stock JVM410. So for every tone setting you create, you can fine-tune the noise gate for the perfect response. There's an added benefit to the noise gate too - faster switching! The complex circuit switching in the JVM410 meant switching channels took around 50 milliseconds - not a problem, but noticeable to ultra-fast players like Satch. Marshall says adding the noise gate circuitry enabled faster switching, only 5-10ms. So even if your playing style requires fast and constant channel switching, the JVM410H Joe Satriani Edition amplifier is ready to keep up.

A more dynamic JVM410
Tight, compressed-sounding guitar tone was in style for a while, one of the reasons the JVM410 is such a popular amp. Joe Satriani wanted a more dynamic, open sound for the JVM410H Joe Satriani Edition. Marshall modified the power supply, added a choke, and voila - the sound opened up, with a powerful voice that retained the dynamics of Satch's playing. If you like your guitar tone to sound expansive, you'll love playing through the JVM410 Joe Satriani Edition.

• Marshall JVM410H Joe Satriani Edition Amplifier Head Features:
• Modified version of the classic JVM410 amp, voiced to Joe Satriani's tonal specifications
• Four noise gates help you dial in a defined tone on every channel
• Clean channel is the same design found in the Marshall LM6100
• Orange crunch channel is the same design found in the Marshall JCM800 (2203)
• Red crunch channel is similar to the Marshall AFD100 in AFD mode
• Overdrive channels sound more dynamic and open, thanks to a re-designed power supply
• "Mid Shift" control on OD1 and OD2 shifts the midrange focus for extra tonal versatility
• 12AX7 preamp tubes, EL34 power tubes
• Footswitch included
• MIDI input for configurable switching and control

Marshall JMD50 Guitar Amplifier Head (50Watts)

Price List Rp.7.540.000

Marshall JMD50 Guitar Amplifier Head (50Watts)

The concept is simple: Take the equipment, technology and tones of professional guitar rigs and fuse them together into a single all encompassing amplifier. With immense versatility, extensive tonal control and that unmistakable Marshall sound, the Marshall JMD50 Digital Guitar Amplifier Head is quite simply one of the most comprehensive and sophisticated amplifiers Marshall has created to date, combining state-of-the-art digital pre-amp technology with studio quality FX and sheer EL34 valve power. Working in close partnership with Swedish software house Softtube, the Marshall team has crafted the latest evolutionary benchmark in hybrid amplifiers that picks up where the renowned JMP-1 left off.

A combination of processor power and tube warmth that only Marshall can deliver.
The Marshall JMD50 50W digital guitar amp head is a mixture of a high-quality digital preamp, a classic all-tube power amp and a studio quality multi-effects unit, all wrapped up into one amazing Marshall package. JMD:1 uses this technology to create a vast library of tone styles firmly rooted in the foundations of Marshall amplifiers. The amplifier head provides interpretations of unmistakable classic sounds, as well as cast variations of combinations. These are delivered in 16 easy-to-access topologies, replicated from component level information for a truly natural and interactive playing experience.

The Digital And Tube Combination For the Marshall JMD:1 amp head
After working closely with the digital experts from Softube, Marshall is now proud to present a digital and tube amplifier solution that not only offers a multitude of tones, but also allows the guitarist to experience and experiment with a variety of pre-amplifier topologies from Marshall's history and all in combination with the power and warmth of a traditional EL34 based power amp stage. JMD:1 puts you in the seat of amp tweakers and hot-rodder's across the globe without needing to touch a single wire, resistor or capacitor. The JMD:1 is an insight into Marshall Amplification in one box.

The Marshall head is a compilation of tones created by Marshall over the last 45 years, from a vintage plexi, to a JCM 800 all the way through to a high gain JVM. For instance, have you ever wondered what a 1974 pre-amp would sound like through a monster 50W tube stage with a hint of reverb for ambience? JMD:1 lets you do that. Do you want to try a Guv'nor pedal through the power of a Marshall 50/50 power amp and a hi-fi style delay? JMD:1 lets you do that too. What makes the Marshall amp head so adaptable and versatile, is that it is completely programmable, allowing you to store your sounds and then access them again with ease.

A delicate balance between technology and tone
Instead of trying to mimic the overall sound of an amplifier by simply creating a copy of the tone that is generated, the Marshall JMD50 takes into account every nuance of a pre-amp. Not only recreating the tone accurately, but also how the unit reacts when you make adjustments to the equalization.

The familiar front panel is extensive in features and easy to navigate. Selecting the pre-amp sound you want is as simple as choosing one of the 16 sounds from the rotary pre-amp control. This section has been divided into four separate groupings for ease; Clean, Crunch, OD, and Lead. From there, all you have to do is set up your EQ section and choose and adjust which of the high-quality effects you desire. Storing this sound is just a case of holding down one of the four channel buttons on the amp or saving to the foot controller, storing everything from the EQ to the parameter of chosen effect. So now your able to go from a classic low wattage tube sound with a hint of reverb, to a traditional high gain '80s lead sound with delay for solos, to a scooped-out metal sound, incorporating chorus with the press of a button.

Custom FX
The effects section of the JMD:1 gives access to a host of popular effects, all of which have been tailored specifically to give the best possible response in the JMD:1. Not only are the effects redesigned, they are also fully adjustable to be as subtle or extreme as you wish. The effects are divided into three separate stages, Modulation, Delay and also an independent Reverb.

Functionality--Studio To Stage
With the included footswitch, the JMD:1 can work to its full ability. The foot controller enables the player to store four sounds across seven banks, giving the option of storing 28 sounds and the ability to access any of them at any given time. When sounds are stored in the foot controller or the amplifier it recalls everything apart from the master volume and the Presence. MIDI switching capabilities also allow the user to control the amplifier remotely, and add the possibilities of up to 128 configurations. Effects loops allow the player to add in any personalization they require, and the balanced line out contains the best Marshall cabinet simulations for recording a multitude of tones directly.

Specification:

Power (RMS):

50 Watt

Format:

Head

Digital Pre-Amps:

16

Power Amp Valves:

2 x EL34

Modulation FX:

 4 - Chorus, Phaser, Flanger, Tremolo

Delay FX:

4 - Hi-Fi Analogue, Tape, Multi

Dimensions:

750W x 310H x 220D (mm)

Weight:

15.7 kg

Preamp:

Digital Natural Harmonic Technology

Reverb:

Independent custom voiced

Midi Control:

Midi in, Midi Thru

Stompware controller:

Supplied

Emulated line out:

XLR

Headphone out:

1/4 inch jack

Line in:

1/4 inch jack

Preamp:

1/4 inch jack

Effects loop:

Serial / Parallel -10dBV / +4dBu with mix control

Speaker output:

1x16 Ohm, 1x8 Ohm, 2x 16 Ohm

Marshall Yngwie Malmsteen YJM100 Signature

Price List RP.17.620.000
Marshall Yngwie Malmsteen YJM100 Signature
Based on the legendary 1959 model, this one delivers awesome all-tube tone with a host of modern features.
The Yngwie Malmsteen Signature YJM100 100W Tube Guitar Amp Head is a 100-watt, valve head that was developed in close conjunction with the legendary Swedish six-string shredder, Yngwie Malmsteen. The YJM offers the perfect balance of vintage tone and looks alongside modern features, which makes the amplifier the perfect players’ tool for “plug in and play” recording or live performance.

Malmsteen has been a Marshall devotee from the get-go so this collaboration comes as no surprise to his countless fans. “I can’t say enough about my love for the sound, feel and look of the wall of Marshall’s. Since I was 10 years old, I’ve insisted on having them behind me at all times,” the guitarist reveals. “I must have had every amp company in the world ask me to endorse them, over the years. To finally have my own signature Marshall is an honor and this amp is truly a master piece!”

The Marshall YJM100 head is wrapped in classic black levant, which is finished with gold beading, hand-cut corners and vintage script logo. In short, vintage all-tube Marshall tone and style at its best with rear panel features that deliver maximum "Malsteen tone."
Based on the power and tone of the “Holy Grail” 1959 Plexi head, the YJM100 offers the ultimate Neo-Classical amp with the following cutting edge features:

1. Footswitchable* Boost with controls for Volume and Gain on the rear panel.
2. Footswitchable* Noise Gate with rear panel Threshold control.
3. Footswitchable* studio quality Digital Reverb with rear panel Level control.
4. Footswitchable* Series FX Loop
5. Half power switch which takes the output power from 100W to 50W when engaged.
6. Built-in, infinitely variable Attenuator control which can take the output stage from 100% to 0.01% and anywhere in-between, while retaining the all-important tone and feel of the all-valve power section. This means the output power can be reduced to a staggering low of 0.05 Watts when in 50W power mode.
7. Valve Failure Circuitry: meaning that if one of the output valves develops a fault, a visual indicator on the rear of the amplifier shows which one is working incorrectly. This “roadie friendly feature” will save valuable time getting the amplifier back up and running again, should a valve failure occur.

Self-biasing circuitry to ensure proper power valve operation each time valves are changed.
Features

• Output (RMS): 100/50 watt
• 2 channels
• 3 band EQ
• Electronic power attenuation: 100% - 0.1%
• Boost function
• Noise gate
• Reverb
• Series effects loop
• Auto bias feature
• Pre-amp tubes: 4 x ECC83
• Power amp tubes: 4 x EL34
• Footswitch supplie

Marshall 2466B Vintage Modern Head

Price List Rp.12.385.000

Marshall 2466B Vintage Modern Head 
The Marshall 2466 100 Watt Head is an all-valve single channel amplifier with a choice of two "dynamic ranges" selectable by a footswitch.
The Low range equates to the performance you would come to expeect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies. Add to this, the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.

Two "frequency selective" Pre-amp volumes(gains)-Body and Detail- facilitate greater flexibility of tonal shaping for individual guitars and styles while the power amplifier is heavily based on the first Marshall amplifiers to be produced, with four KT66 output valves yielding that substantial fat and smooth tone. A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.

VINTAGE and MODERN!-
These are two words that don't normally sit comfortably together unless you're talking guitar amplification. The Vintage aspect of course, the tone-fat, smooth, classic and dynamic. The Modern aspect is the feature-set included to enableease of use and flexibility- Master Volume, series FX Loop, Extra overdrive for those hot "modded" sounds, onboard Reverb and a Newfrequency selective pre-amp topology to facilitate tonal tailoring for specific instruments and musical styles.

Specification:

• Output(RMS): 100 Watts 
• Pre-amp Valves: 4 X ECC83 
• Power Amp Valves: 4 X KT66 
• Footswitch (Supplied): PEDL-00041 
• Dimensions (mm): 750x310x230 
• Weight (kg): 22.5 

Marshall 2266B Vintage Modern Guitar Head

Price List Rp.11.050.00

Marshall 2266B Vintage Modern Guitar Head 
The Marshall 2266 Guitar Tube Amplifier Head, Black of the Marshall Vintage Modern Series is a 50 Watt, all-valve single channel amplifier with a choice oftwo dynamic ranges selectable by footswitch.
The Low range equates to the performance you would come to expect from a stock vintage Marshall amplifier in terms of tone and available gain. The High range adds an extra preamp valve into the signal path, facilitating those classic hard rock tones of the seventies.

Add to this the ability to dynamically interface with your instrument's Volume and Tone controls and the experience translates into a truly expressive and organic feel in performance.
Two frequency selective Pre-amp Volumes (Gains) 'Body' and 'Detail' that facilitate greater flexibility in tone shaping for individual guitars and styles while the power amplifier is heavily influenced by the first Marshall amplifiers to be produced, with two KT66 output valves yielding that substantial, fat and smooth tone.

A Mid Boost switch on the front panel fattens the tone even more while a traditional Marshall tone control circuit enables fine tuning of your sound.
The Marshall 2266 Guitar Tube Amplifier Head Main Features Include:

• 50-Watt valve head
• 4 x ECC83 (12AX7s) preamp valves
• 2 x KT66 poweramp valves
• Master Volume with two Gain Controls Detail (highs) & Body (lows)
• Two footswitchable Dynamic Ranges Low & High
• Mid Boost switch
• Footswitchable Proprietary digital Plate Reverb
• Series FX loop with level switch and bypass
• Footswitch PEDL-00041 Included
• Dimensions: 29-1/2" x 12" x 9" (750 x 310 x 230 mm)
• Weight: 39.6 lbs (18 kg)
• MPN: 2266B-H
• Manufacturer: Marshall

Marshall JMD100 Guitar Amplifier Head (100 Watts)

Price List Rp.8.640.000

Marshall JMD100 Guitar Amplifier Head 

The concept is simple: Take the equipment, technology and tones of professional guitar rigs and fuse them together into a single all encompassing amplifier. With immense versatility, extensive tonal control and that unmistakable Marshall sound, the Marshall JMD100 Digital Guitar Amplifier Head is quite simply one of the most comprehensive and sophisticated amplifiers Marshall has created to date, combining state-of-the-art digital pre-amp technology with studio quality FX and sheer EL34 valve power. Working in close partnership with Swedish software house Softtube, the Marshall team has crafted the latest evolutionary benchmark in hybrid amplifiers that picks up where the renowned JMP-1 left off.

A combination of processor power and tube warmth that only Marshall can deliver.
The Marshall JMD100 100W digital guitar amp head is a mixture of a high-quality digital preamp, a classic all-tube power amp and a studio quality multi-effects unit, all wrapped up into one amazing Marshall package. JMD:1 uses this technology to create a vast library of tone styles firmly rooted in the foundations of Marshall amplifiers. The amplifier head provides interpretations of unmistakable classic sounds, as well as cast variations of combinations. These are delivered in 16 easy-to-access topologies, replicated from component level information for a truly natural and interactive playing experience.

The Digital And Tube Combination For the Marshall JMD:1 amp head
After working closely with the digital experts from Softube, Marshall is now proud to present a digital and tube amplifier solution that not only offers a multitude of tones, but also allows the guitarist to experience and experiment with a variety of pre-amplifier topologies from Marshall's history and all in combination with the power and warmth of a traditional EL34 based power amp stage. JMD:1 puts you in the seat of amp tweakers and hot-rodder's across the globe without needing to touch a single wire, resistor or capacitor. The JMD:1 is an insight into Marshall Amplification in one box.

The Marshall head is a compilation of tones created by Marshall over the last 45 years, from a vintage plexi, to a JCM 800 all the way through to a high gain JVM. For instance, have you ever wondered what a 1974 pre-amp would sound like through a monster 100W tube stage with a hint of reverb for ambience? JMD:1 lets you do that. Do you want to try a Guv'nor pedal through the power of a Marshall 50/50 power amp and a hi-fi style delay? JMD:1 lets you do that too. What makes the Marshall amp head so adaptable and versatile, is that it is completely programmable, allowing you to store your sounds and then access them again with ease.

A delicate balance between technology and tone
Instead of trying to mimic the overall sound of an amplifier by simply creating a copy of the tone that is generated, the Marshall JMD100 takes into account every nuance of a pre-amp. Not only recreating the tone accurately, but also how the unit reacts when you make adjustments to the equalization.

The familiar front panel is extensive in features and easy to navigate.
Selecting the pre-amp sound you want is as simple as choosing one of the 16 sounds from the rotary pre-amp control. This section has been divided into four separate groupings for ease; Clean, Crunch, OD, and Lead. From there, all you have to do is set up your EQ section and choose and adjust which of the high-quality effects you desire. Storing this sound is just a case of holding down one of the four channel buttons on the amp or saving to the foot controller, storing everything from the EQ to the parameter of chosen effect. So now your able to go from a classic low wattage tube sound with a hint of reverb, to a traditional high gain '80s lead sound with delay for solos, to a scooped-out metal sound, incorporating chorus with the press of a button.

Custom FX
The effects section of the JMD:1 gives access to a host of popular effects, all of which have been tailored specifically to give the best possible response in the JMD:1. Not only are the effects redesigned, they are also fully adjustable to be as subtle or extreme as you wish. The effects are divided into three separate stages, Modulation, Delay and also an independent Reverb.

Functionality--Studio To Stage
With the included footswitch, the JMD:1 can work to its full ability. The foot controller enables the player to store four sounds across seven banks, giving the option of storing 28 sounds and the ability to access any of them at any given time. When sounds are stored in the foot controller or the amplifier it recalls everything apart from the master volume and the Presence. MIDI switching capabilities also allow the user to control the amplifier remotely, and add the possibilities of up to 128 configurations. Effects loops allow the player to add in any personalization they require, and the balanced line out contains the best Marshall cabinet simulations for recording a multitude of tones directly.

Specifications

• Power (RMS): 100 Watt
• Format: Head
• Digital Pre-Amps: 16
• Power Amp Valves: 4 x EL34
• Modulation FX: 4 Chorus, Phaser, Flanger, Tremolo
• Delay FX: 4 Hi-Fi Analogue, Tape, Multi
• Dimensions: 750W x 310H x 220D (mm)
• Weight: 20 kg
• Preamp: Digital Natural Harmonic Technology
• Reverb: Independent custom voiced
• Midi Control: Midi in, Midi Thru
• Stompware controller: supplied
• Emulated line out: XLR
• Headphone out: 1/4 inch jack
• Line in: 1/4 inch jack
• Preamp: 1/4 inch jack
• Effects loop: Serial / Parallel -10dBV / +4dBu with mix control
• Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
• Developed in the UK, manufactured in China

Marshall MG100HFX Guitar Amp Head

Price List Rp.8.500.000
Marshall MG100HFX Guitar Amp Head
The Marshall MG100HFX Guitar Amp Head is the ultimate aspirational product for any guitarist looking for that all out Marshall delivery of tone and power.

The Marshall MG100HFX Guitar Amp Head features 'Stompware' technology to provide easy format to store your favourite settings and then play seamlessly through your music like a true professional.
The Marshall MG100HFX Head Main Features Include:

• Amplifier Head 100 Watt RMS Output
• 4-Channels
• 'Stompware' Footswitch Compatible
• 3 stage EQ: Independent Bass, Middle and Treble controls
• Custom Effects: Reverb, Chorus, Phaser, Flanger, Delay
• 2 distinctive Marshall tone sets: Clean,Crunch / Overdrive
• Contour control
• Store your preferred setting by pressing the 'Store' button
• Individual headphone output
• Line input sockets for MP3 / CD
• 3.5mm headphone socket

Marshall JCM800 2203 Kerry King

Price List Rp.14.200.000

Marshall JCM800 2203 Kerry King
This amplifier based on Kerry King Favourite JCM800 head.Kerry call this amp " The Beast "
Specification:

• Head:2203
• Output:100 Watt
• 3 Band EQ
• Pre-Amp:3 X ECC83
• Power Amp:Valves:4 X KT88
• Dimension: 750 X 310 X 215
• Weight: 21.5Kg

Marshall JCM800 2203

Price List Rp.16.450.000

Marshall JCM800 2203 Reissue
The all-valve JCM800 2203 is one of the most highly respected 100W Marshall heads in the company's long history. Evolving from the legendary Plexi head, it was one of the first Marshall amps to feature a master volume control.The very essence of simplicity, the JCM800 2203 is a one-channel, all-valve amp with no reverb or built-in effects. Its foolproof interface, distinctive roar, and larger-than-life 'edge' immediately set the standard by which all other rock amps were judged and it remained the 'industry benchmark' throughout the entire 16 years of its production life.Now it's back by popular demand and just like the 1959SLP and 1987X Marshall has added a Series Effects Loop featuring a true bypass switch that takes the loop completely out of the circuit, thus ensuring the original tone isn't compromised in any shape or form.Features: 100 Watts 4 EL34s in the power stage 3 ECC83s in the preamp True bypass series FX loop 3-band EQ Presence control

Specification:

• Output (RMS): 100 watts
• Preamp Valves: 3 x ECC83
• Power Amp Valves: 4 x EL34
• 3 Band EQ: yes
• Presence: yes
• Footswitch: no
• Speaker: none
• Dimensions (mm): 750 x 310 x 220
• Weight (Kg): 18.8

Marshall JCM2000 TSL100

Price List Rp.15.820.000

Marshall JCM2000 TSL100
Marshall TSL100 Triple Super Lead JCM2000 Series Guitar Amplifier Head (100 Watts)The brand new JCM2000 Triple Super Lead [TSL] series takes the critically acclaimed circuitry of the JCM2000 Dual Super Lead [DSL] range and then goes one step further.

By giving you 3 independent channels and many innovative features, the all-valve TSL range puts an unheard of degree of control, flexibility and, most importantly, TONE at your finger tips. From crystal clean to the mightiest Marshall roar, the TSL does it all.

The JCM2000 Dual Super Lead has been hailed by players and critics alike as "the best Marshall ever made."

Features:

• All valve powered. [4x Svetlana EL34 power valves]
• 3 independent channels for Clean, Crunch, and Lead 
• Mid Boost Switch for tonal options on the Clean channel plus Tone Shift on the Crunch and Lead channels 
• Unique Marshall Deep Switch on the Clean and Crunch/Lead channels adds extra low end resonance when selected 
• Separate Reverb for Clean and Crunch/Lead channels 
• Virtual Power Reduction [VPR] gives the extra saturation of a lower powered valve amp being driven hard 
• Power Amp Mute switch for silent recording 
• Separate FX Loops with front panel Mix controls and level selection for the Clean and Crunch/Lead channels 
• D.I. XLR Output with acclaimed Marshall Speaker Emulation 
• 5-way foot controller for switching channels, Reverb and FX Loop on/off

Marshall JCM2000 DSL100

Price List Rp.13.540.000

Marshall JCM2000 DSL100
The Marshall JCM2000 Dual Super Lead 100 Head provides all the extra gain you'll ever need. Features Classic Gain and Ultra Gain channels, both with 2 modes that can take you from warm, clean tube tones to the souped-up threshold of sonic danger. A Deep switch adds a resonant bass boost for a meatier bottom end and a Tone Shift scoops out the mid frequencies making it ideal for heavy metal tones. Reverb controls for each channel let you adjust the 'verb where you need it. Rear panel features include the usual speaker outputs, effects loop, and 2 footswitch jacks for changing channels and switching reverb in and out (footswitch not included). Delivers 100W of power and includes 4 ECC83 preamp tubes and 4 EL34 power amp tubes.

Marshall JCM2000 Dual Super Lead 100 Head Features:

• Classic Gain and Ultra Gain channels, each with two modes
• Deep switch adds a resonant bass boost
• Tone Shift scoops the mids
• Reverb controls for each channel
• Two footswitch jacks for changing channels and switching reverb in/out
• 100W of power
• Four ECC83 preamp tubes
• Four EL34 power amp tubes

Marshall JVM410H

Price List Rp.14.950.000

Marshall JVM410H
Marshall JVM410H 4-Channel Guitar Amplifier Head (100 Watts)The JVM410H's 100-watt, valve-driven power stage is built on the classic design responsible for the legendary Marshall roar found in the JCM800, 2203 and "plexi" Super Lead amplifiers -- a timeless foundation for countless classic rock and metal guitar tones for over 4 decades. Featuring a quartet of EL34 valves, this peerless design has been expertly crafted to compliment the extraorinary wealth of tones found in the Marshall JVM410H.
Specification:

• Output (RMS): 100 watts
• Channels: 4
• Modes per Channel: 3
• Independent Gain and Volume (per Ch): Yes
• Independent Tone Network (per Ch): Yes
• Independent Reverb Level (per Ch): Yes
• Dual Programming Master Volumes: Yes
• Silent Recording: Yes
• Emulated Line Out XLR: Yes
• Series FX Loop: Yes
• Programmable Parallel/Series FX Loop: Yes
• MIDI Presets: 128
• Pre-Amp Valves: 4XECC83
• Power Amp Valves: 1X ECC83, 4XEL34
• 6-way Programmable Footcontroller (Supplied) PEDL-00044
• Dimensions (mm): 750 x 310 x 215
• Weight (KG): 22
• Dimensions and Weight in Packaging
• Shipping Weight: 60 lbsShipping Dimensions: 33 x 15 x 14 in

Marshall JCM900 4100

Price List Rp.14.280.000
Marshall JCM900 4100 Head
The Marshall JCM900 4100 Guitar Tube Amplifier Head is an all-valve 100 Watt Marshall Head, known for its great tone and reliability.

Marshall JCM900 4100 Guitar Tube Amplifier Head Overview:
The Marshall JCM 900 4100 Amplifier Head also features two channels, A and B. Channel A has been voiced for a sparkling clean on lower gain settings, building up to a raunchy crunch when driven hard. Channel B takes off from where Channel A finishes with acute use of the gain and EQ controls. This achieves a perfect sound for any lead tone from silky smooth to searing saturation.
Each Channel also has its own master section containing controls for Master Volume and Master Reverb.
A Series Effects Loop with level controls lets you connect and match either floor pedals or rack effects.
The Marshall JCM900 4100 Amplifier Head main features include:

• 100 Watt Output (RMS)
• 4 Band EQ
• 3 X ECC83 Pre-Amp Valves
• 4 X 5881 Power Amp Valves
• Series FX Loop
• Dimensions (mm): 750 x 310 x 220
• Weight: 18.8kg

Marshall MA 100 H Guitar Head Amplifier

Price List Rp.6.800.000
Marshall MA 100H
The Marshall MA100H, as the flagship head of the new Marshall MA series, brings 100 watts of all-valve power to the table. Powered by a set of 4 EL34 tubes, the MA100H is the top of the new MA line.
Throughout the history of Marshall Amplification they have strived to satisfy the needs of every kind of guitarist, from the iconic warmth and power of our all-valve flagships to the affordable and inspirational MG range.
In the nineties, Marshall developed their 'Valvestate' topologies, simulating 'all-valve tone' by placing an actual valve in the preamp stage of a solid state amplifier. With the help of suitable expertise and experience in sound manipulation the result was very impressive indeed.

In 2001, AVT was born, incorporating 'Advanced Valvestate Technology' in an effort to evolve this technology further bringing the true valve tone of iconic Marshall amplifiers even closer to the reach of those players who wanted more amplifier for their limited budget.

Marshall are pleased to announce that they have taken things to the next level by removing the solid state pre-amp and power amp sections ever present in Valvestate amplifiers and are able to offer a true all-valve amplifier range within the same price bracket, the MA range. All models in the MA range are fully valve powered and deliver that unmistakeable Marshall tone. They are the perfect stepping stone between every guitarist's first Marshall and one of their own iconic UK built tone monsters.

The MA100H has been carefully designed by Marshall's Research & Development team using the same basic principles as for all Marshall amps; to create an amplifier that delivers something new and exciting for everyone. By keeping the amplifier simple the MA100H is able to deliver the benefits of all-valve tone and colour, while maintaining an attractive price tag. What is more, like every Marshall, it is built to survive 'the road'. So as well as making it the perfect choice for everyone's first all-valve amplifier, the MA range is the perfect choice for people who want to take their sound on tour. The MA range offers a valve amp from Marshall that is more accessible than ever before.

Attractive Looks
The aesthetics of the Marshall MA100H have been specially designed to create a look that stands apart from most other amplifiers from Marshall, while still retaining the essence of what people have become familiar with for over 45 years. Two orange LED's illuminate the interior of the unit, highlighting the power valves. This effect is visible through the fret cloth where the trusty white script logo is mounted onto a solid piece of transparent Perspex.

Valve Power And Tone Simply Executed.
MA amplifiers are powered using the traditional Marshall mainstays of ECC83 double triode valves in the preamp, and EL34 pentode valves in the power amp. The layout and controls are kept simple, allowing you to explore unhindered the full potential of the all-valve tone within. The amplifier benefits from separate equalization stages for both the Clean channel and Overdrive channel allowing you to optimally adjust each one without compromising the other. An extra benefit has been provided in the form of a valve driven 'Boost' function on the OD channel giving you, for example, a solo boost with more volume and gain. The amp also contains a spring reverb for use with all channels within the amp.

Intuitive And Practical In Use.
The MA series was designed with the flexible control demanded by today's players in mind but with a streamlined feature set to keep it cost effective.

Whether in your own home or gigging, setting up the sounds and relative levels is very easy; Starting at the Overdrive Channel with the Boost enabled. This mode can deliver the highest gain and offers some real mean Marshall signature grind for effortless soloing or powerful metal riffing. Set all EQ controls and Crunch Balance to 12 o'clock for now. Turn up the Volume and Gain to get your sound at the required level when playing solos. Fine tune that sound with the EQ including the Presence and Resonance controls.

When you are happy with your 'solo' mode then disengage the boost to give you your rhythm or crunch sound. The volume and gain of this mode is further controlled by the 'Crunch Balance', (this control does not affect the Boosted mode). The Crunch Balance enables a player to preset the gain/volume difference between their rhythm and solo modes and the key to success is the careful balancing of the Overdrive Volume, Gain and Crunch Balance controls.

Finally, the Clean Channel with its own dedicated EQ section can be set to match up with the Overdrive channel.

The supplied footswitch assists live performance by allowing the player to toggle between settings; i.e. Clean to Overdrive, Clean to Boosted Overdrive and Overdrive to Boosted Overdrive ensuring maximum versatility.

Extras
Even though the MA range is designed as a no frills all-valve guitar amplifier, Marshall have included a couple of extra features that allow for yet more versatility in this amplifier range, ensuring the MA really does offer the best choice.

In addition to the all-valve pre-amp and power amp tone achievable, MA amplifiers are equipped with an onboard spring reverb tank which allows you to add an extra dimension to your sound. The reverb chosen perfectly compliments the valve tone of the amplifier and using the front panel reverb level control you can dial in how much you need for your own taste.

As well as an outstanding onboard reverb, all MA amplifiers are equipped with a serial external effects loop for guitarists who want to add effects units into their sound. The nominal level of -10dBV is suited to stomp boxes primarily but not exclusively.

Specifications

• Power Output: 100W
• Preamp Valves: 3 x ECC83
• Poweramp Valves: 4 x EL34
• Channels: 2
• Clean Channel controls: Volume, Treble, Middle, Bass
• Overdrive Channel controls: Volume, Treble, Middle, Bass, Gain, Crunch Balance
• Master controls: Presence Resonance, Reverb
• Overdrive Channel Boost: Yes
• Footswitch (supplied) 'Channel Select' / 'Boost': Yes
• Serial FX Loop (-10dBV nominal level): Yes
• Speaker output options: 8 and 16 Ohms 

Shipping Weights and Dimensions

• Shipping Weight: 51 lbs
• Shipping Dimensions: 17 x 15 x 34 in