Driver RCF ND3030-T3

Price List Rp.3.550.000

RCF ND3030-T3

The ND3020-T3 is a high frequency performance 3-inch diaphragm compression driver with a 2-inch exit throat featuring several state of the art technologies.
The diaphragm and suspension are precision formed from 0.05mm thick pure titanium. 
The suspension is based on an innovative design using progressive parabolic semi circles.

FEATURES

• 3-inch Diaphragm, 2-inch Exit Throat / Pure Titanium Compression Driver
• 220W continuous program power handling
• Frequency range: 500Hz - 20kHz
• Direct Drive Voice Coil Assembly
• 3-slot optimized geometry phase plug
• Aluminium rear cover featuring an advanced vented fin heat dissipation design
• Copper inductance ring for extended response
• Vented, damped, low distortion, variable profile suspension system

ND3020T3 spec sheet

Driver RCF 3020-T3

Price List Rp.3.710.000

RCF ND 3020-T3
The ND3020-T3 is a high frequency performance 3-inch diaphragm compression driver with a 2-inch exit throat featuring several state of the art technologies.
The diaphragm and suspension are precision formed from 0.05mm thick pure titanium. 
The suspension is based on an innovative design using progressive parabolic semi circles.

FEATURES

• 3-inch Diaphragm, 2-inch Exit Throat / Pure Titanium Compression Driver
• 220W continuous program power handling
• Frequency range: 500Hz - 20kHz
• Direct Drive Voice Coil Assembly
• 3-slot optimized geometry phase plug
• Aluminium rear cover featuring an advanced vented fin heat dissipation design
• Copper inductance ring for extended response
• Vented, damped, low distortion, variable profile suspension system

ND3020T3 spec sheet

Driver RCF ND2530-T3

Price List Rp.3.150.000
RCF ND2530-T3
The ND2530-T3 is a high frequency performance 2.5-inch diaphragm compression driver with a 1.4-inch exit throat featuring several state of the art technologies. The diaphragm and suspension are precision formed from 0.05mm thick pure titanium. The suspension is based on an innovative design using progressive parabolic semi circles.

FEATURES

• 2.5-inch Diaphragm, 1.4-inch Exit Throat / Pure Titanium Compression Driver
• 180W continuous program power handling
• Frequency range: 700Hz - 20kHz
• Direct Drive Voice Coil Assembly
• 3-slot optimized geometry phase plug
• Aluminium rear cover featuring an advanced vented fin heat dissipation design
• Copper inductance ring for extended response
• Vented, damped, low distortion, variable profile suspension system

ND2530T3 spec sheet

Driver RCF ND1710-MT3

Price List Rp.1.900.000
RCF ND1710-MT3
The ND1710-MT3 is a high performance 1.75-inch diaphragm compression driver with a 1-inch exit throat featuring several state of the art technologies. 
The diaphragm and suspension are precision formed from 0.025mm thick pure titanium. 
The suspension is based on a vented mylar design.

FEATURES

• 1.75-inch Diaphragm, 1-inch Exit Throat / Pure Titanium Compression Driver
• 80W continuous program power handling
• Frequency range: 1000Hz - 20kHz
• 3-slot optimized geometry phase plug
• Aluminium rear cover featuring an advanced vented fin heat dissipation design
• Copper inductance ring for extended response
• Vented, damped, low distortion suspension system

 ND1710MT3 spec sheet 

Driver RCF ND1411H

Price List Rp.1.010.000

RCF ND1411-H

The new ND1411-H is a compact 1.5-inch diaphragm neodymium compression driver directly coupled with a 90° x 70° constant directivity high frequency horn. The ND1411-H is a very light and versatile driver for professional applications.

FEATURES

• 1.5-inch diaphragm
• 50 W continuous program power handling
• Frequency range: 1500 Hz – 20 kHz
• Optimised geometry phase plug
• Neodymium magnet assembly
• 90° x 70° Constant Directivity Coverage
• Perfectly controlled dispersion
• 1-inch exit throat

ND1411_H spec sheet

White Max

White Max

Combining an extremely durable Technora Aramid Fiber weave with a reinforced counterhoop featuring REMO®’s DuraLock™ technology, this is one of the most popular marching heads in the world. Perfect for all marching applications.

White Max Sound Quality

Black Max

Black Max

Combining an extremely durable Technora Aramid Fiber weave with a reinforced counterhoop featuring REMO®’s DuraLock™ technology, this is one of the most popular marching heads in the world. Perfect for all marching applications.

Black Max with Mylar Underlay Designed for use with marching snare drums featuring upper snare mechanisms. We’ve added a thin layer of Mylar film underneath to resist tearing of the Technora fiber. This provides the benefits of great sound and feel with increased durability for those seeking maximum snare response. Featuring the same feel and articulation as the standard Black Max, but with a quicker decay.

Black Max Sound Quality

Clear Powerstroke 3

Clear Powerstroke 3

The Clear Powerstroke®3 features a thin underlay at the outer edge of the head to subtly dampen unwanted overtones. This creates a near-perfect balance of response and tone control that has quickly made Powerstroke 3 one of Remo’s most preferred drumheads.

Powerstroke 3 Sound Quality

Clear Pinstripe

Clear Pinstripe

Clear Pinstripe® heads are made with two 7-mil Mylar® plies, and have quick decay, making them ideal heads for the “fat” sounds of Pop, Rock and R&B and for those who want a low pitched sound with moderate attack and response characteristics.

The well-known Clear Pinstripe® heads are made with two 7 mil Mylar® plys with a measured layer of a ring reducing agent applied between them at the outer edge of their trademark stripe to dampen high frequency overtones for warmer resonance.

Pinstripe Sound Quality

Fiberskyn Powerstroke 3

Fiberskyn Powerstroke 3

The Fiberskyn® Powerstroke® 3 is available in two weights, 7.5 mil Diplomat® and 10 mil Ambassador®, made from poly-spun single ply Mylar® film.

The Fiberskyn® 3 Powerstroke® 3 is available in two weights, 7.5-mil Diplomat® and 10-mil Ambassador®, made from poly-spun single-ply Mylar® film. The Fiberskyn® 3 Diplomat® Powerstroke® 3 features a thin underlay at the outer edge of the head to subtly dampen high frequency overtones creating subtle mid and low end for snares, tom-toms and bass drums

Powerstroke 3 Sound Quality

Fiberskyn Diplomat

Fiberskyn Diplomat

The Fiberskyn® Diplomats® have warm tones due to a poly-spun fiber single layer of 7.5 mil Mylar® film. They’re known for their warm full tones, resonance, and sustain. The Fiberskyn 3 Diplomat surface is excellent for sticks, mallets and brushes. F3 Diplomat heads produce a balanced spectrum of sound for snares and tom-toms. They are best known as the industry standard for Jazz and Orchestral applications.

Diplomat Sound Quality

Fiberskyn Ambassador

Fiberskyn Ambassador

The Fiberskyn® 3 Ambassadors®are medium-weight heads made with a poly-spun fiber single ply 10 mil Mylar® film to produce a warm mid range resonant sound with a warm attack. The Fiberskyn 3 Ambassador surface is excellent for sticks, brushes. F3 Ambassador heads produce a warm spectrum of sound for snares and tom-toms. They are best known for Jazz and Orchestral applications.

Ambassador Sound Quality

Powersonic

Powersonic

The POWERSONIC® Bass Drumheads gives the drummer controlled mid range and low end for the most powerful bass drum sound that’s “IT”, right out of the box

The POWERSONIC® Bass Drumheads are Constructed of 2 ply 7 mil MYLAR® with two specifically placed internal subsonic dampening rings with ESDS technology ExternalSnap-on Dampening System. The two mounted ¾” internal dampening rings enhance low end without fixating trays or hard backed dampening materials to the drumhead.

The unique patent pending ESDS system employs snaps mounted directly to the drumhead to eliminate the possibility of vibration. This allows you to easily customize your muffling, feel and sustain for different playing situations by “snapping” the strategically placed weighted pillow to the drumhead. Also included is the FALAM® SLAM for added attack and durability.

Powerstroke 4

Powerstroke 4

The Coated Powerstroke® 4 is a 2-ply version of the Powerstroke® 3. Powerstroke® 4's offer more durability and focused mid range tones making them the darkest sounding of the classic coated Weatherking heads.

Powerstroke 4 Sound Quality

Powerstroke 3

Powerstroke 3

The Coated Powerstroke® 3features a thin underlay at the outer edge of the head to subtly dampen high frequency overtones. This creates a near-perfect balance of response and tone control that has quickly made Powerstroke 3 one of Remo’s most preferred drumheads.

Powerstroke 3 Sound Quality

Pinstripe Coated

Pinstripe

Coated Pinstripe's® quick decay makes them ideal heads for the “fat” sounds of Pop, Rock and R&B and for those who want a low pitched sound with warm attack and response characteristics.

The Coated Pinstripe® heads are made with two 7 mil Mylar® plys with a measured layer of a ring reducing agent applied between them at the outer edge of their trademark stripe to dampen high frequency overtones for warmer resonance.

Pinstripe Sound Quality