P-Audio Super Neo SN12-500B 500Watt

Price List Rp.2.865.000

P-Audio Super Neo SN12-500B 500Watt

The P Audio SN12-500B is a high performance wide bandwidth transducer.The SN12-500B is an upgraded design that features many of P Audio s new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN12-500B has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 60Hz to 3000Hz. The SN12-500B features a large 3.28 inch (83.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The SN12-500B utilizes P Audio s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio s inside/outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:

• 3.25” Voice Coil
• 2000 Watts Peak Power Handling
• Neodymium Magnetics
• Precision Inside/Outside Wire Geometry
• Die Cast Aluminum Chassis
• The P Audio SN12-500B is a high performance wide bandwidth transducer. 

Specification:

General Specifications

Nominal diameter

305 mm/12 in

Power rating

500 W(AES)

Nominal impedance

8 

Sensitivity.

96 dB

Frequency range

60-3000 Hz

Chassis type

Cast aluminum

Magnet type.

Neodymium

Magnet weight

0.33 kg/11.7 oz

Voice coil diameter

82.5 mm/3.25 in

Coil material

CCA-W

Former material

Glass fiber

Cone material

Paper

Surround material..

Cloth

Suspension

Single

X-max

4.8 mm/0.19 in

Gap depth.

10 mm/0.39 in

Voice coil winding width.

19.6 mm/0.77 in

Net Weight.

 4.1 kg/11.0 lb

Packing Dimension WxDxH

355 x 355 x 195 mm

Shipping Weight.

5.0 kg/11.0 lb

Small Signal Parameters

Re

5.5

Fs

68 Hz

Mms

68.23 g/2.41 oz

Mmd.

60.78 g/2.14 oz

Qms

5.34

Qes.

0.41

Qts

0.38

Vas

34.82 lt/1.23 ft

BI.

19.67 Tm

Cms.

8.2e-05 m/N

Rms

5.46 Ns/m

Le (at 1kHz)

 0.45 mH

Sd

552 cm2

P-Audio Challenger C18-650EL

Price List Rp.2.145.000

P-Audio Challenger C18-650EL 

The P Audio C18-650EL is a high output low frequency transducer. The C18-650EL is an upgraded design that features many of P Audio s new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The C18-650EL employs a large 3.9 inch (99.3mm) diameter voice coil that provides an AES rated 1200 watts of continuous power handling and a full 4800 watts of peak rated power handling when sufficient amplifier headroom is available. The transducer is optimized for use in properly tuned vented enclosures and will provide maximal reliability when both a vented enclosure and active high pass filtering are employed. The C18-650EL utilizes P Audio s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio s rectangular wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The cone has been treated with a conformal coating designed to provide additional mechanical damping and moisture resistance. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:

• 3.9” Large Format Voice Coil
• 4800 Watts Peak Power Handling
• Active Balanced Cooling
• Ferrite Magnetics
• Precision Rectangular Ribbon Wire
• Double Spider Suspension
• Integrated Demodulation Rings
• Die Cast Aluminum Chassis

Specification

General  Specification:

Nominal diameter

457 mm/18 in

Power rating

1200 W(AES)

Nominal impedance

8 

Sensitivity

 98 dB

Frequency range

30-200 Hz

Chassis type

Cast aluminum

Magnet type

Ferrite

Magnet weight

3.56 kg/125.7 oz

Voice coil diameter

 99.3 mm/3.9 in

Coil material

 CCA-R

Former material

Glass fiber

Cone material

Paper

Surround material

 Cloth

Suspension

 Double

X-max

 5.25 mm/0.21 in

Gap depth

15.0 mm/0.59 in

Voice coil winding width.

25.5 mm/1.0 in

Net Weight

13.3 kg/29.3 lb

Packing Dimension WxDxH

505 x 505 x 275 mm

Shipping Weight

14.7 kg/32.4 lb

Small Signal Parameter

Re

5.8

Fs

 46 Hz

Mms

179.84 g/6.34 oz

Mmd

155.18 g/5.47 oz

Qms

 5.39

Qes

0.58

Qts

0.52

Vas

144.23 lt/5.09 ft

BI

 22.76 Tm

Cms

6.9e-05 m/N

Rms

9.57 Ns/m

Le (at 1kHz)

0.63 mH

Sd

1225 cm2

P-Audio P180/2242 New Design

Price List Rp.2.035.000
P-Audio P180/2242 New Design
The P Audio P180/2242 is a high output low frequency transducer designed with a vintage voicing. The P180/2242 is an upgraded design that features many of P Audio s new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. 

The P180/2242 employs a large 4 inch(101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180/2242 utilizes P Audio s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio s precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. 

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
Features:

• 4” Large Format Voice Coil 
• 4000 Watts Peak Power Handling 
• Active Balanced Cooling 
• Integrated Demodulation Rings 
• Double Spider Design 
• Ferrite Magnetics 
• Precision Rectangular Ribbon Wire Geometry 
• Die Cast Aluminum Chassis

Specification:
General Specification

Nominal diameter	457 mm/18 in
Power rating	1000 W(AES)
Nominal impedance	8
Sensitivity	97 dB
Frequency range	30-500 Hz
Chassis type	Cast aluminum
Magnet type	Ferrite
Magnet weight	2.85 kg/100.6 oz
Voice coil diameter	101.6 mm/4.0 in
Coil material	CCA-R
Former material	Glass fiber
Cone material	Paper
Surround material	Cloth
Suspension	Double
X-max	6.75 mm/0.27 in
Gap depth	13.9 mm/30.6 in
Voice coil winding width	25.5 mm/1.0 in
Net Weight	15.9 kg/35.1 lb
Packing Dimension WxDxH (mm) Shipping Weight	505mm x 505mm x 270mm 15.9 kg/33.7 lb

Small Signal Parameter Data

Re	5.7
Fs	37 Hz
Mms	185.81 g/6.55 oz
Mmd.	159.23 g/5.62 oz
Qms	6.33
Qes	0.51
Qts	0.48
Vas	231.72 lt/8.18 ft
BI	22.0 Tm
Cms	9.5e-05 m/N
Rms	6.82 Ns/m
Le (at 1kHz)	0.64 mH

More Specification data click here

P-Audio P180/2242

Price List Rp.2.065.000

P-Audio P180/2242

The P Audio P180/2242 is a high output low frequency transducer designed with a vintage voicing. The P180/2242 is an upgraded design that features many of P Audio s new technologies and performance upgrades. The 18 inch (457mm) diameter piston will produce extremely high sound pressure levels at very low frequencies and is ideal for high level deep bass and sub woofer response in both live sound and recorded music venues. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The P180/2242 employs a large 4 inch(101.6mm) diameter voice coil and has been upgraded to an AES rated 1000 watts of continuous power handling and a full 4000 watts of peak rated power handling when sufficient amplifier headroom is available. The P180/2242 utilizes P Audio s Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audio s precision flat wire technology to improve conversion efficiency and provide a large crosssectional area for superior cooling. The transducer employs magnetic flux demodulation devices in the structure to increase fidelity and sonic accuracy. The system suspension has been designed specifically for high linear displacement and extended low frequency response. The double spider design further enhances system mechanical control and reliability. The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.

Features:

• 4” Large Format Voice Coil
• 4000 Watts Peak Power Handling
• Active Balanced Cooling
• Integrated Demodulation Rings
• Double Spider Design
• Ferrite Magnetics
• Precision Rectangular Ribbon Wire Geometry
• Die Cast Aluminum Chassis

Specifications:

General Specifications:
Nominal diameter	457 mm/18 in
Power rating	1000 W(AES)
Nominal impedance	8
Sensitivity	97 dB
Frequency range	30-500 Hz
Chassis type	Cast aluminum
Magnet type	Ferrite
Magnet weight	2.85 kg/100.6 oz
Voice coil diameter	101.6 mm/4.0 in
Coil material	CCA-R
Former material	Glass fiber
Cone material	Paper
Surround material	Cloth
Suspension	Double
X-max	6.75 mm/0.27 in
Gap depth	13.9 mm/30.6 in
Voice coil winding width	25.5 mm/1.0 in
Net Weight	15.9 kg/35.1 lb
Packing Dimension WxDxH (mm)	505mm x 505mm x 270mm
Shipping Weight	15.9 kg/33.7 l

Small Signal Parameter
Re	5.7Ohm
Fs	37 Hz
Mms	185.81 g/6.55 oz
Mmd	159.23 g/5.62 oz
Qms	6.33
Qes.	0.51
Qts.	0.48
Vas	231.72 lt/8.18 ft
BI.	22.0 Tm
Cms	9.5e-05 m/N
Rms	6.82 Ns/m
Le (at 1kHz)	0.64 mH