Shure SVX288 / PG28 Wireless Microphone

Price List USD 582

Shure SVX288 / PG28 Wireless Microphone

The SVX Wireless Systems is the low cost option of Shure wireless system being engineered to maintain uncompromising Shure audio quality and performance.

Includes SVX88 Dual Diversity Receiver, Two SVX2 Handheld Transmitters with PG28 Mic Head.

The SVX2 handheld transmitter boasts a rugged, lightweight construction and easily accessible controls. The transmitter design allows for interchangeable microphone cartridges and is offered with PG28 and PG58 cartridge options.
Sound Quality

• New PG28 Mic head for Speech
• Shure sound quality – PG58 for vocal

Set-Up features

• Antenna diversity
• 8 selectable channels
• Adjustable Squelch
• 1/4” output & XLR output
• AA battery & PS 21 power supply
• 2-position HI/LO Output Power Switch (Handheld)

Performance

• Up to 16MHz Bandwidth (UHF)
• Up to 4 compatible channels (country dependent)

SVX288 / PG28 Component:
SVX88 Dual Channel Diversity ReceiverDual channel diversity receiver for use with Shure SVX Wireless systems.
Features:

• Up to 8 selectable channels
• Up to 4 compatible systems*
• Antenna Switching Diversity
• Adjustable Squelch Level
• 1/4" and XLR output
• Available with Handheld and Lavalier system packages
• Power supply: 12 to 18 V DC @ 220 mA, supplied by external power supply
• Maximum output level: XLR connector into 100 kΩ load: -16 dBV, 6.35 mm (1/4”) connector into 100 kΩ load: -22 dBV mW

Further specs:

Dimensions:

32 mm X 168 mm X 104.5 mm (1.26 in. x 6.625 in. x 4.2 in.)

Weight:

245 g (11.5 oz.)

Housing:

Molded ABS

Audio Output Level (Ref. ±48 kHz deviation with 1 kHz tone):

XLR connector into 100 kΩ load: -16 dBV (MIC)

6.35 mm (1/4”) connector into 100 kΩ load:

-22 dBV (MIC)

Output Impedance:

XLR connector:

600 Ω

6.35 mm (1/4”) connector:

600 Ω

Sensitivity:

–105 dBm for 12 dB SINAD, typical

Image Rejection:

>50 dBm, typical

Power Requirements:

12 to 18 V DC @ 130 mA, supplied by external power supply

PG28 With SVX2 Wireless Handheld Transmiter

The SVX Wireless Handheld Transmitter comes with a PG28 or PG58 microphone option.
Features:

• RF Level Switch between 1mW and 10mW
• 2 “AA” batteries
• Up to 10 hours of battery life
• Bottom on/off switch design
• Anti-rolling ring on grille for PG28
• Power and battery status LED
• 6 color rings for microphone identification

Specification

Transmitter Type:

Handheld

Dimensions:

254 mm X 51 mm diameter

RF Output Power:

1

Battery, endurance:

10 h

Weight:

270 g
Further technical specifications:

Audio Input Level:

–20 dBV maximum

Input Impedance:

22 kΩ
RF Output (dependent on applicable country regulations):

HI power mode:

10 mW maximum

LO power mode:

1 mW maximum

Weight:

270 g (10.2 oz.)(without batteries)

Housing:

Molded ABS

Power Requirements:

2 “AA” size alkaline or rechargeable batteries

Shure PG288/PG58 Dual Handheld Wireless

Price List Rp.8.000.000

Shure PG288/PG58 Dual Handheld Wireless

Fast and easy setup, even for a beginner?
Simply press the channel button on the front of receiver and choose one of 10 available channels. A seven-segment LED indicates instantly if the selected channel is available. Once this is done, choose the same on the transmitter, and you are ready to go.

How many musicians can use this system simultaneously?
A maximum of four musicians can use Performance Gear Wireless systems in parallel. One wireless system consists of one bodypack transmitter and one receiver, so at a maximum you can run two dual receiver systems simultaneously.

Why internal antennas?
For ideal signal strength, antennas on a wireless system need to be setup in a certain way. The internal antennas on Performance Gear Wireless systems are already set in this ideal way, offering up to 75 m operating range and optimal signal strength. Additionally internal antennas cannot be broken during setup, use or transport.
Features:

• Hassle free setup
• Internal antennas simplify operation and storage
• Only one channel select button
• A seven-segment LED indicated instantly if the selected channel is occupied
• Reliable wireless technology
• Microprocessor controlled Predictive DiversityWireless “diversity” receivers feature two separate antennas for consistent signal reception.Read moreGo to the glossary
• 10 selectable frequencies
• Up to 4 compatible systems per band

System technical specifications:

• Compatible systems per frequencyThis is how many times a sound or radio wave oscillates in one second.Read moreGo to the glossary band (up to): 4
• Selectable frequencies: 10
• Auto Setup Features: No
• Audio Reference CompandingAudio Reference Companding improves wireless sound quality by having a more efficient companding scheme. Read more Go to the glossary: No
• Included Antennas: Internal 1/4-wave
• Antenna Options: No
• Receiver Network Ability: No
• PC Control: No
• Rack Hardware: Optional (URT)
• Case: Optional System Case
• Transmitter Display: Multi-color LED
• Receiver Display: Multi-color LED
• Battery, Endurance: 9V, > 8 h
• Environment: Small to medium stages

Shure PG88 Specification:

Dual channel diversity receiver for use with Shure Performance Gear Wireless systems.

• Up to 10 selectable channels
• Up to 8 compatible systems*
• 1/4" and XLR audio outputs

Microprocessor-controlled internal antenna diversity
Available with Dual/Vocal, Dual/Lavalier, Vocal/Lavalier, and Vocal/Headset system packages with Performance Gear Wireless.

PG88 Dual Receiver Specifications:

Output Impedance XLR connector:

200 Ω 1/4 inch connector: 1kΩ

Audio Output Level Ref.

+/– 33 kHz deviation with 1 kHz tone

XLR connector (into 100K Ω load):

–19 dBV, typical

1/4 inch connector (into 100K Ω load):

–5 dBV, typical

Sensitivity

–105 dBm for 12 dB SINAD, typical

Image Rejection

>50 dB, typical

Dimensions

188 mm L x 103 mm W x 40 mm D

(7.4 in. x 4.0 in. x 1.5 in.)

Dimensions - PG88

388 mm L x 116 mm W x 40 mm D

(15.3 in. x 4 in. x 1.5 in.)

Weight

241 grams

(8.5 oz)

Weight - PG88

429 grams

(15.1 oz)

Housing

Molded ABS

Power Requirements

12–18 Vdc at 160 mA (PG4),

320mA (PG88), supplied by external power supply.

PG2 Handheld Transmiter

The Performance Gear Wireless handheld transmitter comes with a PG58 microphone option.
The PG2 wireless transmitter is available with the Performance Gear Wireless Systems listed above. See more detail on these systems and others in the Performance Gear Wireless family of systems.