Shure SVX288 / PG28 Wireless Microphone

Price List USD 582

Shure SVX288 / PG28 Wireless Microphone

The SVX Wireless Systems is the low cost option of Shure wireless system being engineered to maintain uncompromising Shure audio quality and performance.

Includes SVX88 Dual Diversity Receiver, Two SVX2 Handheld Transmitters with PG28 Mic Head.

The SVX2 handheld transmitter boasts a rugged, lightweight construction and easily accessible controls. The transmitter design allows for interchangeable microphone cartridges and is offered with PG28 and PG58 cartridge options.
Sound Quality

• New PG28 Mic head for Speech
• Shure sound quality – PG58 for vocal

Set-Up features

• Antenna diversity
• 8 selectable channels
• Adjustable Squelch
• 1/4” output & XLR output
• AA battery & PS 21 power supply
• 2-position HI/LO Output Power Switch (Handheld)

Performance

• Up to 16MHz Bandwidth (UHF)
• Up to 4 compatible channels (country dependent)

SVX288 / PG28 Component:
SVX88 Dual Channel Diversity ReceiverDual channel diversity receiver for use with Shure SVX Wireless systems.
Features:

• Up to 8 selectable channels
• Up to 4 compatible systems*
• Antenna Switching Diversity
• Adjustable Squelch Level
• 1/4" and XLR output
• Available with Handheld and Lavalier system packages
• Power supply: 12 to 18 V DC @ 220 mA, supplied by external power supply
• Maximum output level: XLR connector into 100 kΩ load: -16 dBV, 6.35 mm (1/4”) connector into 100 kΩ load: -22 dBV mW

Further specs:

Dimensions:

32 mm X 168 mm X 104.5 mm (1.26 in. x 6.625 in. x 4.2 in.)

Weight:

245 g (11.5 oz.)

Housing:

Molded ABS

Audio Output Level (Ref. ±48 kHz deviation with 1 kHz tone):

XLR connector into 100 kΩ load: -16 dBV (MIC)

6.35 mm (1/4”) connector into 100 kΩ load:

-22 dBV (MIC)

Output Impedance:

XLR connector:

600 Ω

6.35 mm (1/4”) connector:

600 Ω

Sensitivity:

–105 dBm for 12 dB SINAD, typical

Image Rejection:

>50 dBm, typical

Power Requirements:

12 to 18 V DC @ 130 mA, supplied by external power supply

PG28 With SVX2 Wireless Handheld Transmiter

The SVX Wireless Handheld Transmitter comes with a PG28 or PG58 microphone option.
Features:

• RF Level Switch between 1mW and 10mW
• 2 “AA” batteries
• Up to 10 hours of battery life
• Bottom on/off switch design
• Anti-rolling ring on grille for PG28
• Power and battery status LED
• 6 color rings for microphone identification

Specification

Transmitter Type:

Handheld

Dimensions:

254 mm X 51 mm diameter

RF Output Power:

1

Battery, endurance:

10 h

Weight:

270 g
Further technical specifications:

Audio Input Level:

–20 dBV maximum

Input Impedance:

22 kΩ
RF Output (dependent on applicable country regulations):

HI power mode:

10 mW maximum

LO power mode:

1 mW maximum

Weight:

270 g (10.2 oz.)(without batteries)

Housing:

Molded ABS

Power Requirements:

2 “AA” size alkaline or rechargeable batteries

Behringer VIRTUBE VT100FX

Price List Rp.4.200.000

Behringer VIRTUBE VT100FX
100-Watt Guitar Amplifier with 2 Independent Channels, VTC Tube Modeling, Dual FX and Original BUGERA 12" Speaker

When it comes to output power, the VT100FX brings it in truckloads. Packing a brutal 100-Watts and a special heavyduty 12" BUGERA speaker, the VT100FX includes our radical mid-sweeping Contour control for the ultimate in tone, and an OD1/OD2 switch, which lets you choose between two unique Overdrive channel sounds. And if the sweet sound of crunch pushes all your right buttons, press VT100FX’s Crunch button for a non-stop foray into rhythmic paradise! VT100FX also has a dedicated FX Loop, so you can bring your favorite stomps and rack units to the gig — and still use the great-sounding onboard digital eff ects. If you prefer running a full- or half-stack, the VT100FXH off ers all these features in a piggyback-style head version.

Product Features:

• Powerful 100-Watt, 2-channel guitar amplifier with authentic VTC Tube Modeling
• Awesome dual digital FX processors with chorus/delay, chorus, flanger, delay plus separate reverb
• Original heavy-duty 12'' BUGERA vintage guitar speaker for classic sound reproduction
• 2 full-featured channels offering everything you need from clean over crunch to super-fat distortion sounds
• 2 switchable modes on each channel: Clean/Crunch on the Clean and OD1/OD2 on the Overdrive channel
• Independent Bass, Mid and Treble tone controls on each channel for awesome sound shaping
• Contour control for radical midrange sweep—from traditional to scooped modern
• Additional Headphone and Line output with integrated speaker simulation
• Dedicated CD input for playback of line-level signals (e.g. CD player, drum machine)
• FX loop for external effects devices (rack effects, stomp boxes, wah-wah pedals, etc.)
• Dual footswitch FS112VT for Channel selection and FX bypass included
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

Where are the tubes?
Ask any guitarist what they want most from an amp and they’ll answer with a single word — TONE. That quest for tone drove us to develop our family of VIRTUBE amplifiers. Our proprietary VTC (Virtual Tube Circuitry) gives these amazing amps their in-your-face tube-amp tone. Amps with such rich, harmonic character and buttery tube-like goodness, you’ll wonder where we hid the tubes.

All VIRTUBE amps have split personalities: one that features dulcet-clean output, and one that drives your tone with an aggressive punch that only tubes, or our VTC modeling, can generate. So when the time comes, you’ll be ready for everything from mellow blues to metal mayhem.

Revolutionary VTC Technology

The secret behind VIRTUBE’s incredible sound is our VTC Tube Modeling processor, which exudes the very essence of tube saturation and compression. But VTC does so much more than just generate a cheap copy of a specific amp character. It accurately emulates the interaction between classic tube stages, responding to the subtle tonal changes that occur when one stage hands the signal off the next. The resulting signal is rich in harmonic content and far more true to the nature of tube amps.

Two-Channel Operation

VIRTUBE’s Clean channel is elegant in its simplicity. The sound is open and uncolored and can be tailored to your needs by Volume and the analog passive equalizer. The Overdrive channel features Gain, Volume, Bass, Treble and our proprietary Contour control, with its radical midrange sweep. All this versatility enables you to artfully define your “perfect” tone, from traditional to scooped modern and anything in-between.

Digital FX

All VIRTUBE models, with the exception of the VT15CD, come with state-of-the-art effects — and not some cheap-and-cheesy reverb chip, but a full-blown 24-bit digital effects processor with 16 great-sounding reverbs, choruses, flangers and delays. This tasty collection of effects is a must-have for any guitarist and includes room, stage, concert and cathedral reverbs, slap-back and medium echoes, two long delays, plus slow and fast modulation effects — all right at your fingertips.

Handmade Speakers

It takes a special speaker to handle all this incredible technology, tube-like tone and brutal output power. That’s why we fit each VIRTUBE combo with handmade, heavy-duty BUGERA Vintage Guitar speakers. These babies were custom-designed and handcrafted specifically for the VIRTUBE Series, and are ideally suited for classic sound reproduction.

Get Connected
Whether you’re recording or just jamming on your latest riff, you need the right connections — VIRTUBE really has you covered. The PHONES/LINE OUT B jack is much more than just a place for your headphones to call home. As the name implies, this jack can also be used to send your guitar signal, with speaker simulation, to another amp or mixer.* When the PHONES/ LINE OUT B jack is in use, the internal loudspeaker is muted, allowing you to crank your guitar into the wee morning hours, without bothering the neighbors. If you’d like to play along with previously recorded tracks, just plug the output of your CD/Tape/mp3 deck into the CD IN/LINE OUT A jack. This jack also serves a second purpose, providing yet another Line Out, this time without speaker simulation.*

VT50FX/VT100FX/VT100FXH/VT250FX Rear Panel

VT100FX Front Penel

Fishman Loudbox Artist

Price List Rp.7.739.000
Fishman Loudbox Artist
The Loudbox Artist is an evolution in acoustic amplifiers. It leverages the award-winning design of the Loudbox 100, yet packs more power and enhanced features into an incredibly lightweight and portable package.

120 watts of ultra-clean, bi-amplified acoustic power, two versatile input channels featuring Fishman's legendary tone and feedback-fighting controls, plus a new dual effects section make the new Loudbox Artist the ultimate portable acoustic instrument amplifier for the seriously active musician.
Features:

• Two mic/instrument channels accept 1/4” or XLR sources
• Input channels feature 3-band EQ and feedback controls
• Auxiliary stereo input with level control and 1/4” & 1/8” connectors
• Dual digital effects section, with independent channel & effects level
• Reverb, Chorus, Flanger, Delay, Echo, and Slap Echo
• D.I. output: balanced XLR outputs on each input channel and main mix
• Channel Mute to silence both input channels
• Headphone output
• Foot Switch input for remote muting of Input Channels or Chorus, Flanger, & Slap Echo
• Dual Foot Switch (ACC-LBX-FSW) sold separately
• Loudbox Artist Slip Cover (ACC-LBX-SC1) sold separately
• Combination 1/4” & XLR input
• Resonant-style bass and midrange
• Shelving treble
• Notch filter (feedback control)
• Input gain with 10dB pad and clip indicator
• Reverb and Delay effects level
• Chorus, Flanger and Slap Echo on/off
• Phase switch (feedback control)
• Dedicated effects loop
• 24V phantom power for condenser mics

Specification:

Power:

120 Watts, bi-amped

Drivers:

8” woofer, 100W; 1” soft dome tweeter, 20W

SPL:

112dB SPL @ 1 meter

Speaker Baffle:

10º built-in tilt

Dimensions:

13.5”H x 15.5”W x 11.5”D (34.3cm x 39.4cm x 29.2cm)

Weight:

25.5lbs (11.6kg)

iRig Blue Board Bluetooth MIDI Pedalboard

Price List Rp.1.388.000

iRig Blue Board Bluetooth MIDI Pedalboard
The first wireless MIDI pedalboard controller for iPhone, iPad and Mac
iRig BlueBoard is the first wireless MIDI pedalboard for iOS and Mac that allows you to control your music apps and more from the floor.

Now control parameters of your MIDI-compatible apps like AmpliTube wirelessly from the floor. Switch between presets, change patches, turn effects on and off and control effects like volume wah pedals all from the stage floor without worrying about tripping over wires. Setup is as simple as turning the iRig BlueBoard on and telling it what you want to control.

iRig BlueBoard features four backlit soft-touch pads housed in a sturdy, stage-worthy chassis, two TRS expansion jacks for connecting additional MIDI controllers like expression pedals, and is powered by four standard AAA batteries.

Take control
So how does iRig BlueBoard work? It connects to your iPhone/iPod touch/iPad or Mac via Bluetooth, and when you press its foot switches, it sends out control signals that are converted to MIDI by the iRig BlueBoard app.

At this point the MIDI messages are available to virtually any MIDI compatible app you're running on your iOS device or on your Mac.

The control messages sent from iRig BlueBoard to AmpliTube or other Core MIDI music apps can include bank up/down, MIDI continuous controllers, as well as parameter changes on apps such as IK'sAmpliTube, VocaLive, SampleTank, and iGrand Piano iOS apps plus many others, such as Apple GarageBand.

Control from 10 meters away
iRig BlueBoard communicates via Bluetooth technology so you can place it up to 10 meters (32.8 feet) away from your device and still maintain full control of your apps. The low-profile iRig BlueBoard is only 9.1” (23cm) wide, and it runs on 4 - AAA batteries.

Because it communicates with the mobile device via Bluetooth, it leaves the 30-pin, Lightning and mini-jack connector on the mobile device free for connection with other IK accessories like iRig PRO, iRig HD, iRig STOMP, iRig, iRig Mic, iRig MIDI, iRig KEYS or any other favorite accessory.

Light up the night
iRig Blueboard has 4 backlit control pads housed in a sturdy stage-worthy chassis. Each pad has an additional LED that lights when the pad is active, letting you know exactly which control is on. And since it’s backlit, you can easily see it on a dark stage or performance venue for quick and accurate access.

No limits
iRig BlueBoard also features two expansion TRS jacks so you can add more expression to your performance. Plug your continuous MIDI controller like wah or volume style pedals into these expansion jacks to add even more control and performance versatility.

Designed by and for musicians
Guitar and bass players, singers and keyboard players will now be able to play and control their preferred iOS app on stage or in studio, with the same degree of performance control offered by traditional music hardware, and the freedom of not being tethered by cables. Plus iRig BlueBoard is small enough to fit in a laptop bag. iRig BlueBoard companion apps for other computer and mobile platforms will also be available the near future.

Compatible with Mac and iOS devices
iRig BlueBoard works with any iPhone, iPod touch or iPad supporting Bluetooth 4.0.
It also works with any Mac that supports Bluetooth 4.0 / Bluetooth Low Energy.
Check the specs for a complete list of supported devices.
Features:

• Bluetooth MIDI pedalboard (10m/32.8' range)
• 4 backlit assignable foot switches
• 2 1/4" inputs for assignable expression pedals or switches
• Can send Bank Change, MIDI Program Changes and MIDI Control Changes
• BlueBoard iOS app runs in background on mobile device or Mac, and translates Bluetooth messages to MIDI
• Runs on standard AAA batteries
• Small enough to fit in a laptop bag

iRig BlueBoard Specifications

• Bluetooth Wireless MIDI Pedal Board
• Bluetooth Low Energy (BLE), extremely low power consumption
• Backlit rubber pads for easy identification in the dark
• Completely wireless, battery powered (4 x AAA)
• Completely customizable setup via the iRig BlueBoard dedicated iOS and Mac apps

Dimensions

• Size: 275mm/10.82" x 92mm/3.62" x 25mm/0.98" 
• Weight: 250g/8.81oz

Requirements
iOS Devices

• iRig BlueBoard is compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s, iPod touch 5th generation, iPad Air, iPad 4th generation, iPad 3rd generation and iPad mini. iOS 6.1 or later is required.

Computers

• Mac®: iRig BlueBoard is compatible with any Mac that supports Bluetooth 4.0 / Bluetooth Low Energy. Models: iMac, Mac Mini, MacBook Air, MacBook Pro (all models from June 2012 on). Mac OS X 10.7 or later is required.

MEINL American White Ash Subwoofer Cajon SUB CAJ1 AWA

Price List Rp.2.350.000
MEINL American White Ash Subwoofer Cajon SUB CAJ1 AWA

Bring on the boom with the Meinl Subwoofer Cajon. Instead of a traditional rear port and internal reflex channel, this mighty cajon features a forward projecting sound port that delivers enhanced bass note projection.

Sometimes bigger sound is better, especially when you’re playing a live gig or laying down beats in an “unplugged” situation. When you need to drop some deep bass boom or sublime snare sounds on stage, this is the cajon to get.

Unlike traditional cajons where the low frequency sound port is around back, the Meinl Subwoofer Cajon places its sound port front and center for all to see and hear. It’s this innovative design that enhances bass notes and increases volume while projecting sound forward, out into the audience. Play it just like a regular cajon with your bare hands or with brushes.

The resonating drum body is crafted by Meinl artisans from an environmentally-friendly, medium density fiberboard with a matte finish and a contrasting American white ash wood front plate emblazoned with the Meinl brand heat stamp. Adjustable top corners give you greater control over sound functions and snare wires to enhance musical creativity. The top features a padded seat surface so you can sit comfortably whenever and wherever you play.
Features

• Super low frequency
• Forward projecting sound port
• Internal snare wires
• Adjustable top corners

Material

• Resonating body: Eco-friendly medium density fiberboard
• Frontplate: American White Ash (Fraxinus americana L.)

Focusrite Scarlett Studio

Price List Rp.3.500.000
Focusrite Scarlett Studio
Get it right from the start – with Scarlett Studio. The complete professional recording package for musicians
Whether you’re just starting out on your musical career or you’re a seasoned professional, Scarlett Studio gives you everything you need to start recording studio-quality music right away – right down to the microphone cable. Just add your computer.

Now you can record guitar, vocals, bass or other instruments directly into your computer, complete your recordings with studio effects and create a master mix.

Focusrite has been making high-end recording systems, used in the world's top studios, for over 25 years. That same precision engineering is now available in a compact, high-quality system for you to connect to your computer and start recording now – and it’s all inside this box.

The Scarlett Studio audio interface
The audio interface is the key to making professional recording. At the heart of Scarlett Studio is the Scarlett 2i2. This interface connects to your Mac or PC via the USB port and provides 2-inputs and 2-outputs to your music software. Scarlett 2i2 delivers the superb quality and legendary Focusrite sound that audio industry professionals have relied on for decades. Plug your instrument – bass, guitar, keyboard, synth, you name it – and the included studio microphone straight into the front panel and 2i2 brings them into your computer at the highest possible quality. You can record, edit and mix until you have just the sound you want, with the best possible playback quality so you can hear exactly what you’re doing.

Studio-quality microphone and headphones
Scarlett Studio really does give you everything you need to start recording. There’s a studio condenser microphone, the CM25, that’s specially designed to catch the life and soul of your vocals and acoustic instruments. Clean, smooth and sensitive, it captures every nuance. If you can hear it, you can record it. There’s even a high-quality, low-noise microphone cable included, to connect the CM25 to the Scarlett 2i2.

The included HP60 studio monitor headphones tell it like it is. Accuracy is number one when it comes to monitoring. Unlike many headphones that flatter the sound, making it sound better than it really is, the HP60s give you a clear and accurate impression of exactly how your music sounds, so you can get it just the way you want it. And when you play it back elsewhere, it’ll sound great.

Professional recording software
Scarlett Studio includes all the software you need to get you going straight away. Cubase LE 6 is powerful music production software for recording and mixing. Focusrite Scarlett plug-ins are a set of essential tools for polishing your mix, like compression to tighten up that bass or keep your vocals smooth and even; equalisers to bring out the character in your sound, gating to help remove noises, and reverb to give your music the space it needs. The Novation Bass Station is a software synthesizer that you can use to add additional bass or melody sounds to your music. Because it is a synth you can create totally new sounds that no one has ever heard before, or recreate classic sounds. There is also a sample pack from Loopmasters to add drum loops or sound effects to your track.
Features:

• Studio-quality recording package for your Mac or PC - Scarlett Studio contains everything you need to make professional recordings with your laptop or desktop computer
• Focusrite recording technology - The Scarlett 2i2 audio interface is at the heart of the Scarlett Studio Bundle, employing two of Focusrite’s award winning microphone pre-amps to record at the best quality in its class
• Microphone, headphones and cable included - High-quality condenser microphone and referencing headphones are included to ensure you have all the necessary tools to record and playback studio-grade sound
• All the software you need to record and produce music - Scarlett Studio includes Cubase LE 6 for recording and mixing, the Focusrite Scarlett plug-ins to add extra effects and processing, Bass Station soft-synth and Loopmasters samples
• Truly portable – no power supply - The package is totally portable: if you are using a laptop you can transport your studio in a backpack to your rehearsal space or venue with no need to plug into the mains
• Professional audio quality - Focusrite sound quality is second to none. In technical terms Scarlett 2i2 offers 24-bit performance at up to 96kHz sampling, with better than 105dB dynamic range on record; better than 102dB on playback. That’s true studio quality
• Unique LED ‘halo’ indicators - Know instantly whether you’re recording at the right level. LED “haloes” around the input knobs show green when the level’s right and red if it’s too loud

Specification:
Scarlett Studio HP60 Headphones

• Reference quality headphones
• Extended frequency response
• Adjustable fit
• Closed back design to prevent audio spill when recording
• Mini-jack to 1/4" jack adapter included

Scarlett Studio CM25 microphone

• Large-diaphragm condenser microphone
• 3 m red cable included
• Mic stand adaptor

Scarlett Studio Scarlett 2i2

• 2 in / 2 out USB audio interface
• 96 KHz, 24-bit conversion
• 2 Focusrite microphone preamplifiers
• Red anodised aluminium unibody chassis

Front panel

• 2 line/mic/instrument combination inputs – high quality XLR/¼” TRS Jack Combo
• 2 Line/Instrument switches
• 2 Gain knobs
• 2 Gain halo signal indicators
• 48V Phantom power switch
• Direct monitor switch
• Large monitor level dial
• USB Connection LED indicator
• Headphone output - ¼” TRS Jack
• Headphone level knob

Rear panel

• 2 balanced monitor outputs – ¼” TRS Jack
• USB 2.0 Port
• Kensington Lock slot
• Included software

Steinberg Cubase LE 6

• Focusrite Scarlett plug-in suite

Technical Specification:

Analogue Input Performance
Mic
Frequency Response	20Hz - 20kHz +/- 0.1 dB
THD+N	< 0.002% (minimum gain, -1dBFS input with 22Hz/22kHz bandpass filter)
Equivalent Input Noise (EIN)	< -120dB: measured at 55dB of gain with 150Ω termination (20Hz/22kHz bandpass filter)
Gain Range	+10dB to +55dB
Max Input Level	-3dBu
Line
Frequency Response	20Hz - 20kHz +/- 0.1dB
THD+N	< 0.002% (measured with -1dBFS input and 22Hz/22kHz bandpass filter)
Noise	-90 dBu (22 Hz/22KHz bandpass filter)
Signal to Noise Ratio	> 100dB
Gain Range	-10dB to +35dB
Max Input Level	+20dBu
Instrument
Frequency Response	20Hz - 20kHz +/- 0.1dB
THD+N	0.005% (measured with -8dBu input and 22Hz/22kHz bandpass filter)
Noise	-87dBu (22Hz/22kHz bandpass filter)
Gain Range	+10dB to +55dB
Max Input Level	-3dBu
Analogue Output Performance
Nominal Output Level	0dBFS = 10dBu, balanced
Frequency Response	20Hz - 20kHz +/- 0.2dB
THD+N	< 0.001% (measured with 0dBFS input 22Hz/22kHz bandpass filter, un-weighted)
Output Impedance	< 10Ω
Power Output into 150Ω	15mW
Power Output into 50Ω	30mW
Digital Performance
Clock sources	Internal clock only
A-D Dynamic Range	105dB 'A-weighted' (all inputs).  Converter chipset A-D dynamic range 114dB
D-A Dynamic Range	104dB 'A-weighted' (all outputs).  Converter chipset D-A dynamic range 114dB
Supported sample rates	44.1 KHz, 48 KHz, 88.2 KHz, 96 KHz
Crosstalk
Input to Input	Better than 90dB
Output to Output	Better than 90dB
Input to Output	Better than 85dB
Input Metering
Ring LED lit Green	Signal present (-24 dBFS)
Ring LED lit Red	Signal overload (0dBFS), peak held for approximately 1 second
Weight and Dimensions
Height	45 mm / 1 ¾ “
Width	175 mm / 7”
Depth	100 mm / 4”
Weight	580 g / 1.3 lbs

JuiceRack8 8 Slot 500 Series Power Rack

Price List Rp.9.000.000
JuiceRack8 8 Slot 500 Series Power Rack
JuiceRack 8 is a 19” rack-mount power source designed to house up to eight 500-series modules in a vertical configuration. The rear panel sports eight slots of balanced XLR inputs and outputs along with eight slots of unbalanced 1/4” inputs and outputs. A 48V phantom power switch is located on the front of the rack for easy access. Like the JuiceRack3, the JuiceRack8 boasts rugged, all-metal construction, is designed to be fully compatible with the 500-series format, and features the uniquely powerful and flexible onboard signal routing:

• FEED - Send the audio output of one module into another
• LINK1 - Split a single balanced input and send it to multiple modules simultaneously
• LINK2 - Split a single unbalanced input and send it to multiple modules simultaneously

Onboard LEDs indicate which modules are using the FEED / LINK features, with each slot’s status independently configurable.

Our JuiceRack 8 power supply produces more current than any other 500 series power unit on the market today. So you can be confident that any brand of 500 series module will be powered correctly in your SM Pro Audio JuiceRack 8.

The power output (in milliamps) for the JuiceRack 8 is as follows: JuiceRack 8 = 350mA per module slot

The original API™ spec calls for an average of 130mA for each slot, but there are 500 series modules from many manufacturers that require more power than that average. SM Pro Audio ensures that you can easily power any 500 series module available today with our JuiceRack 8 power supply.

Features:

• 110V -240V selectable voltage operation
• Digitally-controlled audio signal routing with memory
• Sturdy all-metal construction
• 350mA per module slot