Egnater TOURMASTER 4100
TOURMASTER is our flagship amp with four distinct channels of all-tube tone that give you the power to conjure virtually any sound imaginable from country twang, bluesy breakup, raunchy crunch to metallic roar.
You get all this versatility with straight-forward, user-friendly controls that make it easy to find the tone in your head. Clean/Vintage 1 is the cleanest channel, while Clean/Vintage 2 loosens the reigns a bit, responding with smooth, buttery overdrive when pushed. Overdrive 1 is the ultimate crunch channel, articulate and percussive with a powerful thump you can feel. And when you crave serious gain for the fattest leads and most over-the-top riffs, Overdrive 2 has all you need and more.
All four channels feature 3-band EQ, gain, volume, contour knobs and a switch for modern / classic voicing. Master reverb, presence and density controls cover all channels. Tourmaster features Egnater’s exclusive Power Grid, which allows you to independently set each channel’s wattage from 10 to 100 watts.
With the Power Grid you get the best of both words – great power tube distortion at lower levels and tons of clean headroom on demand. Tube-driven reverb, a channel-assignable, tube-buffered effects loop, speaker simulated line out and simple master bias adjust with test points are just some of the features you’ll find in this feature-packed beast. Tourmaster is available as a head or 2x12” combo.
Features:
- MAIN FEATURES
- 100-Watt All-Tube Head
- Four Channels with Selectable Voicing
- Power Grid: Set Wattage for Each Channel from 10w to 100w
- Tube-Driven Assignable Effects Loop
- Tube-Driven Reverb
- Rugged Six-Button Footswitch
- FRONT PANEL
- Four Independent Channels Each With:
— Gain Control
— Master Control
— Treble, Middle, Bass
— Classic/Modern Voicing Switch - Tube-Driven Reverb
- Master Presence/Density
- REAR PANEL
- Assignable Tube-Driven Effects Loop
— Assign to Channels 1&2
— Assign to Channels 3&4
— Assign to all Four Channels
— Assign to Pedal Only
— Send and Return Level Controls
— Selectable Series or Parallel - Cabinet Voiced Line/Recording Out
- Simple Master Bias Adjust with Test Points
- Output Power: 10 to 100 Watts RMS Presetable
- High Input Impedance: 1meg Ohm
- Low Input Impedance: 94k Ohms
- Output Impedance: 4 Ohms, 8 Ohms Or 16 Ohms - Selectable
- Effects Loop Send Impedance: 4k7 Ohms
- Effects Loop Return Impedance: 250k Ohms
- Thd: 5% At Rated Output
- Preamp Tubes: Eight Selected Groovetubes™ / Egnater 12AX7A / ECC83
- Output Tubes: Four Selected Groovetubes™ / Egnater 5881
- Density: +6db @ 120hz
- Presence: +8db @ 3.2khz
- Record Output Level: -50dBv To 0dBv
- Dimensions: 4100 Head 27” (W) x 11” (D) x 10.5” (H) | 4212 Combo 27” (W) x 11” (D) x 22” (H)
- Weight: 4100 Head 60 lbs | 4212 Combo 95 lbs with 2x12” Egnater / Celestion™ Elite 80 Speakers
