JL Cooper's CS-32 Portable Control Surface
If small is beautiful, JL Cooper's CS32 is the Mona Lisa of control surfaces. It really is tiny, measuring a petite 23 x 21.5 x 4.7cm and weighing in at 1.4kg. Yet despite its diminutive proportions, it boasts a feature set that would turn many larger controllers green with envy. It can control up to 32 mixer channels without the need for bank-switching, and provides a full set of transport controls plus a scrub/shuttle wheel, cursor buttons and assignable function buttons into the bargain.
Out Of The Box
The CS32 is available in two versions, one of which hooks up to the host computer via MIDI and the other via USB; we were sent the MIDI version for review. The review unit seemed very well built, with a sturdy metal chassis that looked as though it would survive life on the road without difficulty.
Portability is clearly high on the Minidesk's design agenda, and the USB version has an advantage here, since it draws its power from the computer's USB port. The MIDI version needs to be connected to the included wall-wart power supply, although JL Cooper have done their best to minimise the inconvenience by incorporating all of the CS32's connections (MIDI In, MIDI Out, power, and a quarter-inch jack for a foot switch) into one custom cable. The manual states that the MIDI version is compatible with any flavour of Mac OS from 8.x upwards, and all Microsoft operating systems from DOS onwards. The USB version will not work under Mac OS 8, DOS, Windows 3.x or NT, but this is just due to the restricted support for USB under these OSs.
The documentation supplied with the Minidesk consists of a 20-page printed manual. There's one page on setting the CS32 up to work with OMS under Mac OS 9, and the task of configuring the USB drivers is dispatched equally swiftly. Pro Tools and Digital Performer users can bask in the luxury of two pages each on getting the CS32 to work in their chosen sequencer; everyone else gets a brusque paragraph telling them that the Minidesk is a generic MIDI controller. There's virtually no mention of Windows at all, and the whole business is not helped by the use of illegible screenshots.
Controlling Pro Tools
I tested the CS32 with Pro Tools 5, where it is directly supported. Configuring OMS and Pro Tools to work with the Minidesk was straightforward, and it appears to the application as a JL Cooper CS10 with 32 faders — the largest configuration that is supported by Pro Tools 5. Fortunately, Pro Tools' Help documentation includes excellent instructions on using the CS10, which makes the CS32's wafer-thin manual more excusable. However, confusion can still arise because some of the CS32's controls are labelled differently, and there's nothing in the manual to tell you, for instance, that the CS10's Target Channel Strip buttons have become Pan Select buttons on the Minidesk.
The Minidesk provides 32 sets of channel controls, each consisting of a small fader and three buttons with associated LEDs. Each of the buttons has two functions, depending on which of two globally switched modes the CS32 is operating in. In the first mode you get Track Arm and Track Select buttons for each channel, with the centre channel buttons setting and recalling up to 32 memory locations. The other mode, selected by pressing a small red button at the top right of the unit, turns the three buttons into Mute, Solo and Pan Select controls. Target Channel Strip is a much more apt description for the latter function (I guess there just wasn't space to print it), which is used to choose the track that will be affected by the six large rotary controls at the top of the unit.
These rotaries provide five aux send level controls and a panner, the latter oddly located between sends two and three. So small are the rest of the CS32's controls that these seem grossly out of proportion, but they're actually the same size as the rotaries you'd find on any conventional mixer. As well as controlling pan and send levels, they can also be used to adjust the parameters within an open plug-in editing window on the selected channel, although you still need to use the mouse to open plug-in windows from the Mix or Edit views. The CS32's two-digit LED display reads 'PA' if you're editing pan and sends, or 'P' plus a number to indicate each 'page' of six plug-in parameters you step through, but working out which rotary is controlling which plug-in parameter can still involve a fair amount of guesswork.
The other large control on the CS32 is an endless wheel, which can serve as a scrub or shuttle controller depending on which of the adjacent buttons you press. The wheel itself has a nice smooth action, and works very well in both modes. Above the wheel are the transport and cursor controls, plus buttons labelled F1 to F9 and a blue Shift button. These all have well-defined and sensible roles when used with Pro Tools — for instance, F5, F6 and F7 replicate the QWERTY keyboard's Option, Ctrl and Command keys respectively — but it takes a while to learn what they all do, and some sort of overlay would be helpful. The cursor keys take on additional functions when used with the Shift button, such as increasing and decreasing the horizontal zoom level.
The CS32 is available in two versions, one of which hooks up to the host computer via MIDI and the other via USB; we were sent the MIDI version for review. The review unit seemed very well built, with a sturdy metal chassis that looked as though it would survive life on the road without difficulty.
Portability is clearly high on the Minidesk's design agenda, and the USB version has an advantage here, since it draws its power from the computer's USB port. The MIDI version needs to be connected to the included wall-wart power supply, although JL Cooper have done their best to minimise the inconvenience by incorporating all of the CS32's connections (MIDI In, MIDI Out, power, and a quarter-inch jack for a foot switch) into one custom cable. The manual states that the MIDI version is compatible with any flavour of Mac OS from 8.x upwards, and all Microsoft operating systems from DOS onwards. The USB version will not work under Mac OS 8, DOS, Windows 3.x or NT, but this is just due to the restricted support for USB under these OSs.
The documentation supplied with the Minidesk consists of a 20-page printed manual. There's one page on setting the CS32 up to work with OMS under Mac OS 9, and the task of configuring the USB drivers is dispatched equally swiftly. Pro Tools and Digital Performer users can bask in the luxury of two pages each on getting the CS32 to work in their chosen sequencer; everyone else gets a brusque paragraph telling them that the Minidesk is a generic MIDI controller. There's virtually no mention of Windows at all, and the whole business is not helped by the use of illegible screenshots.
Controlling Pro Tools
I tested the CS32 with Pro Tools 5, where it is directly supported. Configuring OMS and Pro Tools to work with the Minidesk was straightforward, and it appears to the application as a JL Cooper CS10 with 32 faders — the largest configuration that is supported by Pro Tools 5. Fortunately, Pro Tools' Help documentation includes excellent instructions on using the CS10, which makes the CS32's wafer-thin manual more excusable. However, confusion can still arise because some of the CS32's controls are labelled differently, and there's nothing in the manual to tell you, for instance, that the CS10's Target Channel Strip buttons have become Pan Select buttons on the Minidesk.
The Minidesk provides 32 sets of channel controls, each consisting of a small fader and three buttons with associated LEDs. Each of the buttons has two functions, depending on which of two globally switched modes the CS32 is operating in. In the first mode you get Track Arm and Track Select buttons for each channel, with the centre channel buttons setting and recalling up to 32 memory locations. The other mode, selected by pressing a small red button at the top right of the unit, turns the three buttons into Mute, Solo and Pan Select controls. Target Channel Strip is a much more apt description for the latter function (I guess there just wasn't space to print it), which is used to choose the track that will be affected by the six large rotary controls at the top of the unit.
These rotaries provide five aux send level controls and a panner, the latter oddly located between sends two and three. So small are the rest of the CS32's controls that these seem grossly out of proportion, but they're actually the same size as the rotaries you'd find on any conventional mixer. As well as controlling pan and send levels, they can also be used to adjust the parameters within an open plug-in editing window on the selected channel, although you still need to use the mouse to open plug-in windows from the Mix or Edit views. The CS32's two-digit LED display reads 'PA' if you're editing pan and sends, or 'P' plus a number to indicate each 'page' of six plug-in parameters you step through, but working out which rotary is controlling which plug-in parameter can still involve a fair amount of guesswork.
The other large control on the CS32 is an endless wheel, which can serve as a scrub or shuttle controller depending on which of the adjacent buttons you press. The wheel itself has a nice smooth action, and works very well in both modes. Above the wheel are the transport and cursor controls, plus buttons labelled F1 to F9 and a blue Shift button. These all have well-defined and sensible roles when used with Pro Tools — for instance, F5, F6 and F7 replicate the QWERTY keyboard's Option, Ctrl and Command keys respectively — but it takes a while to learn what they all do, and some sort of overlay would be helpful. The cursor keys take on additional functions when used with the Shift button, such as increasing and decreasing the horizontal zoom level.
