Monday, November 28, 2011

Biema 2000Tll-2 Active Speaker System

Note: Speaker stand not included, speaker stand is an optional item
Price List Rp.10.200.000
Biema 2000Tll-2 Active Speaker System
2000TⅡ-2 is a compounding speaker system consisting of two single 8 ″ two-way full-range satellites and a single 15 ″ double-toroid subwoofer. Inside the subwoofer there is a six-channel amplifier module which has been equipped with preamps, stimulus, compressor& Expander, 50~250Hz bass crossover, EQ, PEQ, noise gate, ect. The total output power (RSM ) is over 800W.



  1. MASTER VOL adjust left, right channel volume
  2. LEVEL LEFT control left channel volume
  3. LOW adjust left, right channel low volume
  4. MID adjust left, right channel middle volume
  5. HIGH adjust left, right channel high volume
  6. LEVEL RITHT control right volume
  7. FREQUENCY adjust low crossover, from 50 to 500Hz, frequency cut in the speed of 24dB/oct
  8. LEVEL SUB adjust low volume
  9. OUTPUT CHOICE SWITCH can use it choose the model you need
  10. GROUND ground switch, can choose directly ground or lift
  11. SIG/LIMIT LEFT left channel signal indicator(green)and compress indicator (red)
  12. SIG/LIMIT RIGHT right channel signal indicator(green)and compress indicator (red)
  13. POWER power indicator
  14. SIG/LIMIT SUB low signal indicator(green) and compress indicator(red)
  15. PHASE Subwoofer Phrase Switch. If it is pressed, the same phrase is selected and if not, reversal phrase is selected
  16. LEFT SIGNAL INPUT (1/4" single plug or XLR ) and line output (XLR)
  17. RIGHT SIGNAL INPUT(1/4" single plug or XLR ) and line output (XLR)
  18. VOLTAGE SWITCH: the power of 115V or 230V can be used
  19. POWER SWITCH
  20. POWER INPUT SOCKET: input power can choose 115V/60Hz or AC 230V/50Hz
  21. Left channel full range amplifier output , SPEAKON can connect left channel satellite speaker.(only used for 2000TⅡ-2 mode)
  22. Right channel full range amplifier output, SPEAKON can connect right channel satellite speaker .(only used for 2000TⅡ-2 mode)
  23. FUSE; When use the power of 115V, use the fuse of T25A/250V, When use the power of 230V, Use the fuse of T12A/250V
  24. When use the system of 4000TⅡ-1, the output of full range amplifier is available. The impedance of connected is 8Ω
2000TⅡ-2 technical data:
MODEL

2002/108a satellite
Frequency response
100Hz-18KHz,±3dB
Axial sensitivity 1W/1m
97dB
Maximum SPL@1m
119dB@10%THD
Nominal impedance
Low/mid driver
1x8"

HF driver
1"
Directivity
H90° x V40°
Crossover frequency
2.5KHz; 12dB per octave
HF protection(passive)
bulb
Power handling capacity
150W RMS
Connector
1xSpeakon@Neutrik NL 4(Black)
N.W/G.W
21kg/24kg
Product Dimensions
283x250x420mm
Shipping Dimensions
475x294x568mm
MODEL
2000T-2 
Frequency response
35-250Hz,±3dB
Axial sensitivity 1W/1m
101dB
Maximum SPL@1m
129dB@10%THD
Bass woofer
P15.2W300x1
Sub woofer power amp
2x300W RMS for bass
satellite power amp
150Wx2 RMS for satellites(4Ω)
Active protection circuitry
Opto-limiter, subsonic filter
Input sensitivity
0.775V
Connector
2x XLR through
2x Speakon@satellite out
2x XLR input
2x 1/4" TRS input
EQ
Low
75Hz ±10dB
Mid
1.3kHz ±10dB
High
10kHZ ±10dB
Low pass turning frequency
50-250Hz -3dB
N.W/G.W
48.5kg/53.5kg
Product Dimensions
447x640x542mm
Shipping Dimensions
500x750x595mm


2002/108a satellite configuration:
 

2000TⅡ subwoofer configuration: 

Related Posts Plugin for WordPress, Blogger...
Web Informer Button