Price List Rp.5.750.000
Numark 5000FX 5 Channel Scratch Mixer
NUMARK 5000FX 5-Channel Scratch Mixer With Effects and Sample
5000FX is a five–channel tabletop mixer that allows you to mix, affect, and control the most complex DJ situations. It harnesses the power of Numark's custom digital processing technology placing powerful effects and sampling at your fingertips.
This powerhouse mixer contains five channels with three phono, nine line, and two mic inputs. On the output side, 5000FX offers a pair of balanced XLRs plus Master, Record, Booth, and Zone RCA-pairs, and a digital 44.1 kHz S/PDIF out.
Two Beatkeeper™ units enable you to auto–detect BPM from two different sources with accuracy. Internal sampling gives you 30 seconds of memory to grab audio from any source. Multi–effects processing, smart, seamless looping, and BPM synchronization all give DJs superlative control and power over performances.
5000FX is, quite possibly, the most flexible DJ mixer ever created. With a wide range of inputs, built-in effects, sampling, dual Beatkeeper™, and more, 5000FX fuels your creativity.
This powerhouse mixer contains five channels with three phono, nine line, and two mic inputs. On the output side, 5000FX offers a pair of balanced XLRs plus Master, Record, Booth, and Zone RCA-pairs, and a digital 44.1 kHz S/PDIF out.
Two Beatkeeper™ units enable you to auto–detect BPM from two different sources with accuracy. Internal sampling gives you 30 seconds of memory to grab audio from any source. Multi–effects processing, smart, seamless looping, and BPM synchronization all give DJs superlative control and power over performances.
5000FX is, quite possibly, the most flexible DJ mixer ever created. With a wide range of inputs, built-in effects, sampling, dual Beatkeeper™, and more, 5000FX fuels your creativity.
Features:
- 12" tabletop configuration
- 5 input channels with 3 phono, 9 line (3 switchable to phono), and 2 mics
- Master balanced, unbalanced, XLR, 2 zone and 1 S/PDIF outputs
- Dual Beatkeeper™ units to auto–detect BPM from 2 sources
- BPM alignment of effects and loops
- Effects processor with interactive scratch/effect/pitch wheel
- Effects include: Scratch, Sonar, Chop, Echo, Delay, Filter with Vocal kill
- Pitch/Key shift, Distort with Vocoder
- 18 Second audio buffering for Scratching and Reverse Audio with Bleep effect
- Onboard sampler with 30 seconds of memory, smart looping, and BPM synchronization
- Optional rack ears available
Specification:
Line:
10Kohm input impedance; 83mV rms sensitivity
for 1.22V output
Mic:
600 ohm input impedance unbalanced; 1.9mv rms
sensitivity for 1.22V output; 200mV rms max input
Phono:
47Kohm input impedance; 1.3mV rms sensitivity
@1KHz for 1.22V output
Line:
6.5V rms max
Headphone:
0.5W into 47 ohm
Distortion:
less than 0.01%
Line:
Better than 82dB
Mic:
Better than 80dB
Phono:
Better than 72dB
Line:
20Hz-20KHz ±0.5dB
Mic:
20Hz-15KHz ±0.5dB
Phono:
±1dB except for controlled attenuation of 3dB @
20Hz to reduce rumble and feedback
Bass:
+6/-32dB @40Hz
Middle:
+6/-32dB @1.35KHz
Treble:
+6/-32dB @15KH
Channel
Kill:
80dB at 20Hz-20KHz
Power
Consumption:
24 Watts typical; 29 Watts with full headphone
output
Dimensions
(W x D x H):
320mm x 355mm x 100mm
Weight:
6.1 kgs
The
maximum sample length is 36 seconds, total available buffer is 48 seconds, and
buffer not used for sampler is used for echo, delay, scratch, reverse, and
bleep effects. The sampler will automatically stop recording once the
record time exceeds 36 seconds
