RØDE Stereo VideoMic Stereo On Camera

Price List USD 360
RØDE Stereo VideoMic Stereo On Camera
The RØDE Stereo VideoMic is a broadcast quality stereo microphone designed for use with camcorders, DSLR cameras and portable audio recorders.
Two high resolution 1/2" condenser capsules are mounted in a fixed X/Y stereo array, providing a very natural stereo recording, while still offering a high level of rear rejection.

The Stereo VideoMic is an ideal microphone for capturing environmental and ambient sounds, as well as live music. For dialogue and directional applications the RØDE VideoMic and VideoMic Pro are recommended.
An in-built shock mounting system isolates the Stereo VideoMic capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone.

Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (Note that cameras with proprietary sized mounts may require an additional adaptor).
In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

A -10dB level attenuation (or PAD), selectable from the rear face of the microphone, allows recording of loud sound sources, such as live music or motorsport.
The Stereo VideoMic is ideal for use with DSLR cameras such as the Canon 5DMkII, Canon 7D, Canon 1D, Canon 550D/T2i, Canon 60D, Nikon D7000, Nikon D5100, Panasonic GH1 and Panasonic GH2.

Specification:

Acoustic Principle	Pressure Gradient
Active Electronics	JFET impedance converter
Capsule	0.50"
Polar Pattern
Address Type	End
Frequency Range	40Hz - 20kHz
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
Weight	288.00gm
Dimensions	65.00mmH x 102.00mmW x 170.00mmD
Output

RØDE VideoMic Pro Shotgun Microphone

Price List USD 360
RØDE VideoMic Pro Shotgun Microphone
The RØDE VideoMic Pro is a true shotgun microphone designed for use with camcorders, DSLR cameras and portable audio recorders as a source of primary and reference audio.
At the heart of the VideoMic Pro is a high resolution 1/2" condenser capsule that provides broadcast quality audio via a 3.5mm minijack connector (outputting the mono signal to both left and right channels). A super-cardioid polar pattern ensures that surrounding audio is minimised, and your recording is focused on the subject in front of the camera.

An innovative suspension system separates the VideoMic Pro capsule and electronics from its mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. A lightweight and flexible yet robust multi-strand cable provides significantly lower noise transference than traditional audio cable while ensuring a high definition signal.

Easily accessible on the rear face of the microphone are the power, filter and level controls. In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.

Below these controls are the level settings, which attenuate or boost the recorded level as required. The -10dB level attenuation (or PAD) is ideal for recording loud sound sources, such as live music, motorsport, or interviews where the subject is very close to the camera. The +20dB level boost is designed for use with DSLR cameras such as the Canon 5DMkII, Canon 7D, Canon 1D, Canon 550D/T2i, Canon 60D, Nikon D7000, Nikon D5100, Panasonic GH1 and Panasonic GH2. This boost in the microphone output allows the user to reduce the camera's preamp level (or mic-input level), effectively reducing the amount of noise generated by the camera's comparatively low quality audio circuitry.

The microphone uses a standard sized shoe mount for on camera use, and features a 3/8" thread in the base of the mount for easy boom pole mounting. Note that cameras with proprietary shoe mounts will require an adaptor or alternative mounting solution.
The VideoMic pro is battery powered, and provides over 70 hours recording from a single 9V battery.

Specification:

Acoustic Principle	Line Gradient
Active Electronics	JFET impedance converter
Capsule	0.50"
Polar Pattern
Address Type	End
Frequency Range	40Hz - 20kHz
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level	6.9dBu (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options	(Over 70 hours operation from 9V alkaline battery)
Weight	85.00gm
Dimensions	95.00mmH x 43.00mmW x 150.00mmD
Output

RØDE Profesional Video Microphones

Price List USD 203
RØDE Profesional Video Microphones
The RØDE VideoMic is a professional grade 1/2" condenser shotgun microphone designed for use with consumer video cameras and personal audio recorders.

An in-built shock mounting system isolates the VideoMic capsule and electronics from its standard sized shoe mount, providing isolation from external physical factors that may cause unwanted rumble and vibrations in the microphone. Its standard sized shoe mount also includes a 3/8" thread in the base for easy mounting on a boom pole or stand. (note that cameras with proprietary sized mounts require an additional adaptor.)

Its super cardioid polar pattern is highly directional, focusing on the subject in front of the camera, and minimising any surrounding sounds.
Manufactured from rugged and durable ABS, the microphone is designed to withstand being tossed in a camera bag while remaining lightweight and extremely portable.

In addition to the microphone's native 40Hz-20kHz response a selectable high-pass filter at 80Hz is available, which will prevent low end noise such as air conditioners and traffic from being recorded.
A -10dB and -20dB level attenuation (or PAD), selectable from inside the battery compartment, allows recording of loud sound sources, such as live music or motorsport.

Specification:

Acoustic Principle	Line Gradient
Active Electronics	JFET impedance converter
Capsule	0.50"
Polar Pattern
Address Type	End
Frequency Range	40Hz - 20kHz
Output Impedance	200Ω
Maximum SPL	134dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Sensitivity	-38.0dB re 1 Volt/Pascal (12.60mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Power Options
Weight	176.00gm
Dimensions	65.00mmH x 102.00mmW x 250.00mmD
Output