M-Audio Fast Track Pro

Pin It

 

Price List Rp.2.400.000
M-Audio Fast Track Pro
The Fast Track Pro delivers all the mobile recording flexibility of the Fast Track USB, plus even more professional features. You get 2 front-panel mic/line inputs complete with phantom power for condenser microphones, inserts for outboard effects balanced and unbalanced analog outputs, S/PDIF digital I/O, MIDI I/O, and more. Fast Track Pro also features near-zero latency direct hardware monitoring and low-latency ASIO software monitoring, plus an A/B source switch and dual output pairs for DJ-style cueing. Fast Track Pro is compatible with most popular PC and Mac music software. USB connection and bus power along with class compliancy for Mac OS X* make it a breeze to set up.

* Class compliancy supports 16-bit/48kHz 2 x 4 operation on OS X 10.3.9 and higher. Driver installation required to access more I/O.


Top Features

• 24-bit/96kHz audio interface with dual mic/instrument preamps
• balanced/unbalanced analog I/O
• S/PDIF coaxial; MIDI I/O
• ¼” headphone output with level control and A/B source switch
• Mac and PC compatible; class compliant with Mac OS X 10.3.9 and higher

Professional Recording—Anywhere, Anytime
Fast Track Pro is designed to let you record with professional results whenever and wherever you want. A single USB connection gives you access to all the I/O you need for microphones and instruments like guitars, as well as MIDI- and S/PDIF-equipped digital audio gear. The microphone inputs are even phantom powered to accommodate the studio-quality condenser microphones like the M-Audio Luna and Solaris. Our time-tested driver software gives you total routing control over the 4 x 4 I/O—including setting up an effects loop with external devices.


Monitoring Galore
One of the hallmarks of a great audio interface is its monitoring flexibility—and Fast Track Pro delivers. Fast Track Pro features a powerful headphone amp with volume control. Hardware direct monitoring eliminates the latency or delay inherent in even the best internal circuitry while listening to your input and existing tracks. You can also listen to your input complete with effects while recording by using the extremely low-latency ASIO monitoring we’ve perfected over the years. Two pairs of analog outputs let you connect to a DJ mixer and use the front-panel A/B source switch to audition cues.

Compatibility

• WDM
• ASIO 2
• Core Audio

Minimum System Requirements (PC)

• Pentium 3 – 500 MHz (higher speed CPU may be necessary for laptops)
• 256MB RAM
• DirectX 9.0c

Windows XP (SP2)* / Vista SP2 (32Bit , 64 Bit) / Win7 (32Bit , 64 Bit)

• (Windows 2000, 98, 98SE, ME & NT not supported) USB port
• Home and Professional Edition only. Windows Media Center Edition is not supported.
• M-Audio suggests that you also check the minimum system requirements for your software, as they may greater than the above.

Minimum System Requirements (Mac)

• Macintosh G3** 600 / G4** 667MHz (higher speed may be necessary for laptops) 256MB RAM
• OS X 10.3.9 / 10.4.2 / 10.5.1 (earlier versions of Mac operating systems are not supported) USB port
• Dolby AC-3 and DTS pass-through with Apple DVD player
• M-Audio suggests that you also check the minimum system requirements for your software, as they may greater than the above.
• G3/G4 accelerator cards not supported

Specifications

Digital Audio Interface Specifications	48kHz sampling rate unless otherwise stated
Mic Inputs (A/D)
Input Impedance	2.7k Ohms unbalanced, 5.4k Ohms balanced
Maximum Input Level	from +24dBu @ min gain, pad on to -40dBu @ max gain, no pad
Channel-to-Channel Crosstalk	< -110dB
SNR	-101dB, A-weighted
Dynamic Range	101dB, A-weighted
THD+N	0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response	20Hz to 20kHz, +/- 0.1dB
Pre-amp Gain	>40dB
Pad	-20dB pad
Instrument Inputs (A/D)
Input Impedance	>220k Ohm, unbalanced
Maximum Input Level	From +22dBV @ min gain, pad on to -42dBV @ max gain no pad
SNR	-100dB, A-weighted
Dynamic Range	100dB, A-weighted
THD+N	0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response	20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate
Pre-amp Gain	>40dB
Pad	-20dB pad
Line Inputs (A/D)
Input Impedance	20k Ohms balanced and unbalanced
Maximum Input Level	+4.1dBu balanced, +1.9dBV unbalanced
Channel-to-Channel Crosstalk	< -110dB
SNR	-101dB, A-weighted
Dynamic Range	101dB, A-weighted
THD+N	0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response	20Hz to 20kHz, +/- 0.1dB @ 48kHz sample rate 20Hz to 40kHz, +/- 0.1dB @ 96kHz sample rate
Pad	-20dB pad
Input Inserts (analog)
Maximum Level Send	+6dBV, unbalanced
Maximum Level Return	+6dBV, unbalanced
THD+N	0.00281% (-91dB) @ -1dB from max level, 1kHz
Frequency Response	20Hz to 40kHz, +/- 0.1dB
Line Outputs (D/A)
Output Impedance	150 Ohms unbalanced, 300 Ohms balanced
Maximum Output Level	+1.8dBV, unbalanced +10.1dBu, balanced
Channel-to-Channel Crosstalk	< -108dB
SNR	-103dB, A-weighted
Dynamic Range	103dB, A-weighted
THD+N	0.005% (-86dB) @ -1dBFS, 1kHz
Frequency Response	20Hz to 20kHz, +/- 0.3dB @ 48kHz sample rate
Headphone Output (D/A)
Maximum Output	-2.5dBV at THD < 0.05% into 32 ohms
Working Range	32 to 600 ohms
I/O Bit Depth Sample Rate (kHz) With Drivers 4 x 4 16 44.1/48 2 x 4 24 44.1/48 2-in OR 2-out 24 88.2/96 Class compliant 2x4 16 44.1/48