Presonus HP60 Headphones Mixing System

Pin It

 

Price List Rp.3.975.000

Presonus HP60 Headphones Mixing System

The Problem Solver“Turn my headphones up!” “More me, I can’t hear myself!” “Turn down that click!” It gets old. Change that tune with the HP60 headphone distribution system. The HP60 is more than just a half-dozen headphone amps, it’s a field-tested solution to a host of common headphone-monitoring problems.

Let’s start with “turn my headphones up.” Each of the HP60’s six headphone amps has its own level control and puts out 150 mW, which is loud enough to drive the alligators out of the Louisiana swamps. If they can’t hear this headphone system, they’re stone deaf. More likely they’ll scream, “turn it down, you’re killing me!” 

Problem solved.

Now let’s solve “turn down that click.” The HP60 features two sets of line-level, stereo inputs that are routed to all six headphones, a Mix control that sets their relative levels for each headphone output, and a mute switch for each headphone. So you can feed the main control-room mix to channel A and the click to channel B and use the Mix controls to individually raise or lower the click relative to the main mix for each musician. Problem solved.

As for “more me,” in addition to the two pairs of main stereo inputs, you get an external stereo input pair with level control for each headphone channel. A Mono switch lets you sum the left and right inputs. So you can send each of the whiners a feed of just their instrument or voice and can control the level separately for each. Problem solved.

Take Command

With the HP60, when you talk, everyone listens. Hit the Talk button and use the talkback-mic input and your favorite dynamic mic to tell ‘em what to do. You can even use a footswitch to control the talkback hands-free.

Each channel also has stereo line outputs that can send a copy of the line-level headphone-channel mix to additional headphone amplifiers or monitor systems. So if you have a large band and need more than six headphones, you can chain two or more HP60s.

So get the problem solver, the most flexible and advanced headphone-mixing system in its price class: the PreSonus HP60.

Features:

• 6 screaming-loud (150 mW/channel) headphone amplifiers, each with:
• Headphone level control
• Mix control (blends signals from input pairs A and B)
• Mute switch (mutes input pairs A and B)
• Stereo external input with level control
• Mono switch for external input
• Stereo (L/R) line outputs
• 2 stereo input channels (A and B)
• Talkback-microphone input with:
• Mic-level control
• Talk button (momentary switch)
• Footswitch jack for hands-free talkback operation

• Input/Output
• 4 balanced ¼” analog line inputs (L/R Mix input pairs A and B)
• 6 stereo ¼” external analog line inputs (1 per channel) for “more me,” with trim controls
• 6 stereo ¼” headphone outputs (front panel)
• 6 stereo ¼” line outputs (1 per channel); carries a copy of the channel mix
• 1 balanced XLR input for external dynamic talkback microphone
• 1 ¼” footswitch jack for hands-free talkback operation

• Physical
• 1U 19” rack-mountable, rugged steel chassis
• Internal power supply with standard IEC connector

Tech Specifications:

	Input A	(2) ¼” TRS balanced 10k Ohms
	Input B	(2) ¼” TRS balanced 10k Ohms
	External input	TRS stereo unbalanced 10k Ohms
	Headphone amplifier output power	150 mW RMS (60 Ohms) per channel
	Audio outputs	¼” TRS stereo unbalanced per channel
	Master controls	Talk button, Talkback volume, Input A, Input B
	Channel controls	Headphone level, Mix A/B control, External input level, Mono, Mute
	External talkback	XLR with TS external control jack
	Power	IEC - factory configured for 115V or 230V
	Dimensions	1U - 19"(W) X 1.75" (H) X 5.5"
	Weight	8.0 lbs.
As a commitment to constant improvement, PreSonus Audio Electronics, Inc. reserves the right to change any specification stated herein at any time in the future without notification.