Peavey Ecoustic Session 300
Peavey Ecoustic® Series amplifiers are highly versatile amplification systems designed for acoustic instruments, vocals and line-level devices such as samplers and audio players in performance and rehearsal applications.
The Ecoustic E110 provides 100 wattsof clean power into a system containing a 10" full-range loudspeaker and a high-frequency horn. Both channels operate independently, with 9-band graphic EQ on channel 1 and two-band adjustment on channel 2, a Notch Filter and Phase Inverter on channel 1 to control feedback, footswitchable Mute/Tuner, and more. The master section includes digital reverb, chorus and delay with channel assignment and parameter adjustment, and the optional foot controller allows users to access up to eight presets plus an onboard looper.
The Ecoustic E208 and Ecousitc E20 are rated at 30 watts and 20 watts, respectively, and have a compact, lightweight design that makes them ideal for rehearsals. The Ecoustic 208 features a built-in analog chorus and reverb, and both models include headphone outputs for quiet practicing.The Peavey Ecoustic Session 300 is a bi-amplified, 300-watt, three-channel acoustic amplifier combo with digital effects, looper and a high-frequency ribbon driver with independent level control.
The Peavey Ecoustic Session 300 Main Features Include:
- 300 watts of peak power
- Bi-amplified system with 2x8" full-range speakers and one high-frequency ribbon driver with independent level control
- Three independent channels
- Three operation modes: Duet, Link and Switch
- Separate nine-band graphic EQs on each channels 1 and 2
- Combo XLR and 1/4" inputs on channels 1 and 2 (9V/48V phantom power)
- Gain control with clip light on channels 1 and 2
- Master volume on channels 1 and 2
- Piezo pre-shape EQ switch on channels 1 and 2
- Channel 1-2 master blend control
- Notch Filter with FLS® on each channels 1 and 2 for controlling feedback
- XLR and 1/4" TRS direct outputs on channels 1 and 2
- Separate effects loops on channels 1 and 2
- RCA auxiliary input on channel 3
- Power amp in, preamp out for stereo operation with another amp
- Master line out
- Master volume
- Stand mountable
- On-board looper with foot controller
- Advanced WYSIWYG (What You See Is What You Get) DSP technology
- Reverb, chorus and delay with independent effect parameter adjustment
- Footswitchable phase inverter for controlling feedback
- Footswitchable tuner/mute out
- Footswitchable tap tempo, looper, preset mode and channel
- Up to 8 effect presets with optional foot controller
