K-Array Redline Series KR200s
The K-array Redline Series KR200s is a compact and efficient portable powered PA/stage monitor system ideal for Concert Halls, Theatre, Houses of Worship and AV presentations. It is comprised of the KL18ma self-powered subwoofer with an additional DSP controlled powered output and 35mm pole adaptor designed for a KR200 ultra- slim line array satellite speaker. The KR200 is comprised of 2 x two meters stainless steel chassis each containing 32 x 2" neodymium transducers. They are 5.5 cm wide and 7 cm deep, weighing 9 Kg total. They are hinged together for focusing and easier transport. Due to the slim profile and minimum distance between drivers it reproduces the full vocal frequency range with clear intelligibility and excellent phase coherent 120° x 7° coverage.
The 18" long-excursion speaker of the KL18ma sub section employs a neodymium magnet and 3" voice coil. The large ports are designed to be fully symmetrical to the speaker, which means the back loading on the driver is consistent and even, with no port air turbulence. The cabinet weighs a mere 20 Kg. The triangle port construction provides excellent structural integrity and strength, effectively eliminating any box resonance.
The overall system response is from below 40 Hz to 19KHz with 127dB continuous and 133 dB peak output.
An internal DSP module provides control presets. The output can optionally be used to power the KL18 passive subwoofer. Dedicated software allows for remote control of the system from a PC
Features:
- Unique performance-to-size ratio
- High power 127dB continuous, 133dB peak
- Fitted with integral handles
- Line array emission wavefront
- Integrated mounting system
- DSP on board with 16 dedicated presets
- Remote PC control software (RS485)
- Ultra fast set-up and dismantling system
- Theatrical sound reinforcement
- Concert halls, clubs, houses of worship
- Portable and installed audio-visual systems
- Cinema and special effects
Specification:
KR200S (specifications for one side system)
Acoustics
Speakers power handling 800(sub) + 500(sat) w(EAS)
Max power
1200(sub) + 1200(sat) w 1
Impedance
8Ω(sub)+16Ω(sat)
Frequency range
30Hz - 19 KHz +/- 3dB (preset dependent)
SPL 1W/1mt
97 dB (sub) 101 dB (sat) 2
Maximum SPL
127dB continuous - 133 dB peak
Coverage
Horizontal 100°
Vertical 7°
Crossover
Type
DSP controlled
Frequency
150 Hz minimum (preset dependent)
Transducers
Low frequency
1 x 18” Neodymium speakers with 3” voice coil
High frequency
32 x 2” Neodymium speakers with 0,75” voice coil
Audio Input
Connectors
male + female parallel 3-pin balanced XLR
Wiring
Pin1 = ground - Pin2 = hot - Pin3 = cold
Audio powered Output
Connector
Female Speakon
Wiring
Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C.
Remote control Input
Connectors
1 x female 8 poles RJ45
Power Input
Connectors
2 x PowerCon IN/OUT
Amplifiers
Type
1 modules class D - DSP controlled
Subwoofer power
1000 Watt 3 @8Ω
Satellite power output
1000 Watt 3 @8Ω
Protection
Dynamic limiter, over current, over temp, short circuits
AC power
Operating range
210 - 240 Vac 50Hz (Default)
100 - 120 Vac 60Hz (Selectable)
5.5 A / 115 Vac - 2.9 A / 230 Vac
Minimum operation voltage
95 Vac - 195 Vac
Maximum operation voltage
125 Vac - 205 Vac
Max continuos and burst current
Default 6A(>10 sec) - 12A (<1 sec)
Selectable 10A(>10 sec) - 20A (<1sec)
Physical
Dimensions
KL18ma: 46.5 x 47.5 x 61 cm (18.31”x 18.70” x 24.02”)
KR200: 5.7 x 222.5 x 7.4 cm (2.24”x 87.60” x 2.91”)
Weight KL18ma: 25.8 Kg (56.88 lbs) KR200: 8.2 Kg (18.08 lbs)
