Engineered in the USA, the Biema range offers a host of functions & features usually only found in amplifiers costing twice the price or more. They are manufactured to exacting quality control procedures, ensuring reliability and dependable performance under the most demanding conditions.
Features:
- Model: FW1100
- Servo power supply
- Intellectualized cooling system
- Wide ranged frequency response
- Low THD
- Soft start
- Limiter
- Stereo, parallel, bridge mode
- Perfect protection
- Proprietary compression technology
Specifications:
Model | FW1100 | ||
Output Power | Stereo | 8Ohm | 1100W+1100W |
TA 1KHz THD/0.1% | 4Ohm | 1650W+1650W | |
Bridge | 8Ohm | 3300W | |
Frequency response | 20Hz-50KHz -1.5dB | ||
Input sensitivity | 0.77V/26dB/1.4V | ||
Input impedance | 20K ohm | ||
Signal/noise ratio a-weighted RMS | > 105dB | ||
Crosstalk at rated output power 8 ohm 1KHz | > 70dB | ||
Damping factor f=1KHz 8 ohm | > 400 | ||
Output circuit type | 2 Steps Class H | ||
Protection | Short circuit, current limited DC fault, AC line fuse, thermal cut OFF, power up/down transients,slow start | ||
Indicators | Power(blue) protect(yellow) clip(red) bridge(green) parallel(green) | ||
Cooling | Variable speed fan | ||
Front panel controls | Level ACH, BCH power switch | ||
Rear panel controls | Stereo/bridge/parallel mode switch,0.77V/26dB/1.4V input sensitivity switch,ground/lift switch | ||
Input connectors | Bal XLR , bal1/4" | ||
Output connectors | Binding posts 2-pole, 4-pole Speakon | ||
Power consumption half power 8 ohm | < 1470W | ||
Power supply | AC 115V/230V 50-60Hz | ||
Product/Shipping dimensions(WxDxH) | 482x540x132(620x525x230)mm | ||
N.W/G.W | 37.5kg / 40kg | ||
